Switching

Hello can any one have an Idea of binding IP address with MAC in DHCP in cisco router and switchsThanks in advance

hi,I would like to ask the difference between class based queueing and weighted fair queueing?which one is the recommneded to use?

I have a question regarding what the default gateway of a host should be.A switch has IP's for 2 vlans including the management vlan. This switch also has a default gateway statement pointing to the router interface. This is a switch at one location....

I notice that many vlan & vtp configuration commands don't appear in the config file for integrated IOS. What's a quick way to see and back up the current vlan & vtp configuration information? Ideally, what I'd like is something like the config file ...

Hello,Is it possible to run NAT inside on a sub interface (int f0/0.100) and not run NAT on another subinteface (int f0/0.101)?

Hello all - I have two 3550's and I have trunking enabled on the fast ethernet ports. I have tried to set both ends to 100/full, however they do not come up. If I go back and set them both to auto/auto they come up. Can I not set trunk ports to 10...

I am reviewing a config file of a 6500-SW and it shows that there are 5 VLANS configued. When I did a show cdp neighbor details, it only showed the default vlan (VLAN1) and no physical links to any other devices. This switch is offsite and I just got...

Hello everyone,I was hoping someone could shed some light on this command for me. I am setting up a syslog server on all the switches ( 3524xl, 3550-48-SMI switches ) and not sure how to use a command. I've set the IP address of the server, set the...

Lets say I have a 48 port Layer 3 switch and I only want to advertise out of one interface (with the ability to add interfaces later; one at a time) and not receive any advertising. What is the easiest way to accomplish this task without advertising...

Hi all, can anyone tell me the latest standards in wireless technology, ie speeds etc

Do I have problems when I'm running on all the switches RSTP (see fig) ? CORE switches are 6500 connected via a channel, 3560 are stacked with yellow cable and one 3560 is connected via fiber to CORE1 and the other 3560 to CORE2CORE1 |===============...

Hi all, can anyone tell me why we have the option to put ports into multiple vlan memberships, ie untagged member of vlan 1 but tagged member of vlan 2

Hi, I have a cisco 1811, I want to have different nat rules based on the external ip trying to reach my public ip.example:ip nat inside source static 10.10.10.1 70.42.21.23 If the external src ip is 99.99.99.99 and ip nat inside source static 10.10....

What does it mean, how to fix it?