Switching

hi expertise,m using cisco works 2k, the problem is its getting very slow during login time as well as browsing time. what could be the problem.thanks & rgds..Ashish Singh

hi can anyone advise me a software/hardware package that will monitor LAN traffic (identify top talkers in terms of bw utilisation, applications, peak traffic in/out etc) per switch port interface?thanks in advance

hi all i have a silly doubt. if i buy a 3560 with the SMI image loaded in it. and then i install a EMI image in it then will it support the EMI images. i mean my main doubt is is it just abt the images or do we need a license on the switch for runnin...

Hi all,As you see, we are new at this.6 VLANs on the first floor, 4 on the second. Each floor has a C4500, tied together with redundant fiber.The switch on the second floor sits with the router to the internet.Do we have the right idea? Please advise...

My ADSL provider loses sync during bad weather and cannot do anything about it. The issued modem also drops the connection. My problem is I have to travel 60 miles to power cycle the modem(s) to regain dsl service. If this only happened occasionally ...

To achieve Internet loadbalance and redundancy, we currently connect to SBC (T1/Frame Relay) and TimeWarner (Cable) for Internet access. Between the edge routers (2600/2500) and our ASA firewall, we position a 3rd router as loadbalancer using CEF, RI...

hi Expertise, m using squid proxy server,but users by- pass my proxy server through HTTP tunnel or any other by-pass proxy softwre. Is there any way to prevent this thing??? My second problem is can we block p2p software at cisco router?? My third pr...

hi all, Does arp work at layer 2 of the osi model ? or layer 3 also ?

Dear All,My question here in this forum , in the Process of :-1- Which Interface should I apply this Access-list ?2- on which Direction on the selected interface I have to apply this Access-list ? In or Out ?Now, My question is here :-Was I correct i...

Hi all, can anyone give me a definate descrition of a bridge, and what is the 5-4-3 rule ?

Hi, having trouble getting my point-to-point frame lab, to work.Here is some info:R2#sh frame mapSerial0/1.100 (up): point-to-point dlci, dlci 100(0x64,0x1840), broadcast status defined, activeR2#ping 172.12.13.1 Type escape sequence to abor...

Staff usually uses db9 to rj45 to connect to console port for initial setup. We are thinking about getting new laptops but none come with serial ports. What are people using? I've seen some USB to db9s. will this work?

Does anybody here know about the difference between using a single mode and a multimode fiber from edge to the core? Right now we are using all multimode fiber to connect all the switches. Is it true that using a singlemode is much faster and can han...

Dear All, ---- 1.I have one Router for Internet 1841. this Router have 2 Interface as following :- 1- the First Interface is connected to MY ISP Router with this IP :- 213.255.237.109 /248. 2- the Second Interface is connected to MY Switch 'UNMANAGED...

HI,We are going to be deploying a VOIP system within the 1st quarter of next year. During the 2nd or 3rd quarter we will be deploying WAP's for barcoding. All of our LAN switches will be upgraded. Yes, we will be hiring a consultant to help with th...