HSRP-5-STATECHANGEHi there!!I will tell you what is the scenario I have to see if someone has had a similar problem that can support me.We have a campaign in the organization that connects through a primary link to your corporate through L2L and a se...
Forum Posts
Resolved! Question about Vlan trunking
Hi Guys, Firewall inside interface 192.168.2.1 Switch 1Has VLAN 1, IP Address 192.168.2.5 (Device default gateway) Switch 2 VLAN 1, IP Address 192.168.2.5VLAN 200, IP Address 172.17.0.1 I am trying to create a trunk on both switches to carry those 2 ...
Hello,I have a SG350X and want to use private VLAN's.If i use a Promiscuous Port for the connection to the Router everything works. But i only have one uplink Port at the router for different VLAN's, is it possible to have something like a Promiscous...
Hi!I want to know which oid(s) should I query to know whether native vlan on trunk port on cisco switch is tagged or not?I am querying the oid .1.3.6.1.4.1.9.9.46.1.6.3.0 (vlanTrunkPortsDot1qTag) on cisco 3560 (E Series) and I am getting global value...
I am facing issue will tracing the IP of end host directly connected on my catalyst switch. But at the same time I am able to ping the same IP from other network and CORE switch. Even I was not able to trace the VLAN (L3 interface) IP also but after ...
Resolved! Port for Data and voice issue
i have 100 users with same configuration Port Configuration With IP Phone and PC On Same Port. connection setting Firewall Sonicwall to Core switch SG550 to Access switch 5 Netgear and 1 cisco sg300.When we joined the office in morning the our phones...
Resolved! Cisco 2960X stack Active power down
Hi All,I would like to know the following questions.Pls help meI have 2960X data stack two switch,one is active and one is member(only data stack,no power stack) that are connected to one for PDU A and one for PDU B.The coming day datacenter will be ...
Hi All, I configured an ASR with following QoS Ip access-list ext AF4permit ip 10.0.0.0 255.255.255.0 any ip access-list extended 197permit ip any host 20.0.0.2 class-map match-all AF4_includematch not access-group 197 class-map match-any AF4_outputm...
Hello What the the recommended command should I apply for Trunk ports between edge switches in the below digram to avoid looping in the network.Appreciate your help Thanks
Hello,One of our customer just bought this switch which is connected through 2 trunk links to another switch, where it's getting it's power from over PoE.He did not bought an separate power supply, and whenever we plug in an PoE device or just an lap...
Hello everyone,We have auto QoS implemented on our switchports since the majority of our ports have phones connected to them. We also use video conferencing apps such as Teams, Zoom, Exam Med, etc. from the PCs connected behind the phone that's conn...
Hi, My customer is asking for an industrial switch 2 10g sfp ports and 18 poe 10/100/1000M ports I could not find this Please help
We have two Nexus 7706 switches in our data center. Both are running 8.2(1). This morning, I went to remove a specific VLAN from a port-profile. This port-profile is tied to several VPC port-channel interfaces (shared across both 7Ks), which are trun...
I have one 2955 Switch out of the case and need to arrange http to associate from the internet browser and need additionally telnet. I followed the manual for designing, setting the passwords and setting ip worker http for example, however doesn't wo...
Hi, I am considering upgrade software image for Catalyst 9500 running on my customer site.Two switches are running in Stackwise Virtual domain.What is the new version of C9500 IOS-XE which supports automatically restoring from Stackwise Virtual recov...
