Activity in Technology and Support
RAVPN hardening on Cisco Secure firewall
Hi, we have a Cisco Secure Firewall that has an RAVPN setupThe authentication uses LDAP which has an LDAPAttribute where users must be in a VPN security group in AD. This is confirmed working. However, AD Accounts are getting disabled and we think it...
need help to tec support & warrenty issue
Dear Cisco Support,The warranty information for my device is incorrect. Additionally,I am experiencing a daily problem requiring a restart every 24 to 48 hours.Please find the serial number attached/below and assist me.WZP29199N6H ; WZP2921AB4P ; DT3...
Cisco ISR 4331 - voice gateway configuration
Hi everyone,I am trying to expand my existing VoIP network that uses a CUCM 11.5 to another location using a newly bought CISCO isr4331/k9 but I've never configured an isr4331/k9 and don't know how to proper make use of it.I need to install 80 Cisco...
Cisco SSM upgrade failed from from 9-202601 to 10-202606 (202608)
Cisco SSM (Smart Software Manager) upgrade failed from 9-202601 to 10-202606 (and also to 10-202608). By Cisco documentation there is a direct path upgrade. Upgrade status is not as failed, but there is missing important data like system name, empty ...
Troubleshooting Intermittent Packet Loss on Cisco Switches
I am troubleshooting a Cisco switch where users occasionally experience packet loss, but the interface error counters look normal.When the usual interface checks don’t show anything obvious, what do you normally investigate next? Do you focus on STP ...
Resolved! ISE - EAP-FAST certificate for machine and MSCHAP for user authentication
Hello,Does anyone know what is the correct way to configure Policy Set for EAP-FAST when NAM uses certificate machine authentication and MSCHAP user authentication ? I have this policy but I doubt this is the correct one.
CUIC 12.6.2 ES08 rollback
Dear All,We installed CUIC 12.6.2 ES08. After installation, custom and stock reports using anonymous PL/SQL blocks with multiple parameters no longer functioned correctly, and report filters were unavailable.We then installed the Rollback COP (ciscoc...
Secure AP Onboarding with Dual-Port AP in Cisco SD-Access Fabric
1.Introduction & OverviewModern enterprise Wi-Fi 7 deployments utilize the dual-port Cisco Catalyst CW9178 Access Point to deliver industry-leading resiliency, multi-gigabit throughput, and operational uptime. The CW9178 features dual multi-gigabit E...
Finding serials on ceiling mic pro's without removing them
Hi,I have some Ceiling Mic Pro's that are mounted direct to ceiling so difficult to view serial numbers without taking them down - which I don't want to do! They are connected up via a C9200 switch to an EQ if it helps.The EQ is not on Control Hub so...
CUCM TFTP Not Backed Up
We are running CUCM 15.0.1.12900-234. We've noticed that sometimes DRF doesn't back up TFTP files on one or both of our TFTP servers (while it's possible that TFTP won't be backed up on either of our two TFTP servers, it's more likely that only one ...
Registro Federal de Contribuyentes (RFC) Requirements in Mexico
see this message in English below Conforme al artículo 27 del Código Fiscal de la Federación de México, Cisco es requerido por la regulación Mexicana (la “Regulación”) a recabar la información certificada de los Registros Federales de Contribuyentes ...
Error: No V3 pbf found
Hello all,we're trying to reinstall an APIC G5 server with 6.1 version after an attempt of install 6.0 failed with error.'[' -d /sys/block/vdb ']'+ '[' -z '' ']'+ '[' -z sda ']'+ ROOTDRIVE=sda+ echo 'Chose root drive: ROOTDRIVE=sda'Chose root drive:...
Title: Ethical Hacker course: customized Kali Linux OVA not showing in
Hello,I am enrolled in the Ethical Hacker course (72 hours) on Cisco Networking Academy. The lab asks me to download the pre-built customized Kali Linux VM (OVA) from the Resource Hub, but I cannot find it there.What I have already tried:Logged in wi...
Resolved! Cisco ISE upgrade from version 3.3 patch 8 to patch 12
Hi All,I am preparing for ISE upgrade from current version 3.3 patch 8 to patch 12 .Prior to upgrading, I did the system and operational backups and also exported and saved the system certs.1. Do I need to export all trusted certs as well and save th...
NSO CLI permission issue with load merge terminal. The error message..
Hi all,We have multiple nso environments. In only one of them some users have a problem with the command load merge terminal.The commands look as followsncsadminuser@INT2# configEntering configuration mode terminalncsadminuser@INT2(config)# load merg...
| User | Helpful Count |
|---|---|
| 116 | |
| 79 | |
| 74 | |
| 40 | |
| 39 |
