Activity in Technology and Support
ASA 5525-X ver 9.14.4.23 Anyconnect software
Hello all, I wanted to see if anyone knew if i am able to download and push the newest secure client software on our older ASA. We currently use anyconnect ver 4.10 and would like to get this higher prior to our migration to FMC. I only see Secure Cl...
HELP!!! AnyConnect Secure Mobility Client can't be installed on this disk... (Mac)
Trying to VPN for work. It was working fine before yesterday. Continue to get the following error message: AnyConnect Secure Mobility Client can't be installed on this disk. New version 3.1.07021 of the Cisco AnyConnect Secure Mobility Client is alre...
Issues upgrading IE3400
Tried to upgrade 20 IE3400 switches from 17.09.04a to 17.15.06 using Catalyst Center, and faced an issue where non of the 20 switches booted correctly. When getting a local resource to connect using console cable, the switches seemed to have booted i...
Meraki MX75 migration from one organization to other
Hi everyone,I'm looking for some advice on the best way to consolidate my devices and licenses.The Scenario: I manage 3 different clients, and all of their networks were originally grouped under a single Meraki Organization. Recently, I purchased a n...
Cisco ISE
Hello, i get the message when i try to test the connectivite between my switch and ise:Attempting authentication test to server-group ISE using radiusNo authoritative response from any server.I assum that the cnfig in switch is correct and i can reac...
NDFC 4.1.1g - SNMPv3
I tried to configure SNMPv3 for the N9K switches, but I could only find the SNMP user template and could not find the SNMP group template.Could anyone advise on the correct template name? or how to configure it without freeform.
Resolved! Support de BFD par Cisco XRd Control Plane
Hello la team,Savez vous à quel point BFD est supporté par XRD Control plane ? En particulier en l'associant à BGP en mode stricte ou pas.Merci par avance,Jerems
Resolved! BFD Support on Cisco XRd Control Plane
Hi Floks,I wondered how much xrd control plane supports BFD protocol (strict mode or not) with BGP as Client.Any information on that matter ?Thanks in advance,Jerems
MPLS Forwarding Problem
Hello, everyoneThis is my topology:I am configuring MPLS Inter-AS Option C. I've configured everything apart from send-label on the ASBR routers. I also haven't configured R6-XR (the RR in AS 1235 to not change the next hop) so it is basically settin...
Switches getting InActive State upon Registering in CiscoACI Simulator
I am trying to deploy Cisco ACI 5.2-4d Simulator version on my ESXI Server. The Deployment went fine and I am able to Launch APIC Gui. The Switch. The Leaf and the SPine gets reflelcted in Non-Pending Registration. I tried registering these Switches....
Analyzer CSQ All Fields need to split the consolidated Interval column
Hello, I'm relatively new to WxCC Analyzer reports and come from a CUIC background. In the CSQ All Fields report, we need to split the consolidated Interval column into two separate columns so that date and time metrics can be reported on and filter...
How to get started with Cisco SD-WAN
Recently, I've been looking for a job as a fresher, but not getting any. It's really tough to get a job nowadays in India as a fresher. So, I thought why not just keep learning that's why I am here today. I would like to know some good resources to g...
IOS-XR Refusing to allocate a label for a prefix in MPLS Inter-AS
Hello, everyone.I have this topology:R3-RR and R6-XR-RR peer via BGP VPNv4. In order for this to happen, I must advertise their loopbacks via the IPv4 eBGP session between my two ASBRs -> R4-XR and R5. I then redistribute these routes into OSPF.The w...
Resolved! CUCM and UCCX certificates update .
Hi, I will need to update tomcat and tomcat-trust certs in cucm and uccx . Can you please tell me if i am correct or wrong: I see CUCM has tomcat cert A and the same certificate as tomcat-trust, I aslo see this cert is installed as tomcat trust in UC...
cEdge NAT issue after upgrade to Version 17.12.8
Hi Team,Could someone confirm whether there is a known or ongoing bug in Version 17.12.8 related to NAT functionality?We are experiencing NAT issues where the NAT table shows 0 entries when the problem occurs. The temporary workaround is to reboot th...
| User | Helpful Count |
|---|---|
| 155 | |
| 68 | |
| 63 | |
| 62 | |
| 50 |
