Activity in Technology and Support
New to network programing
I'm exploring network programming because I've got a project where it seems like it would be critical / necessary. I want to develop an automated way to backup the running config, diff it to the last stored copy, store / version if different, and mos...
TEAP for Windows 10 using Group Policy and ISE TEAP Configuration
With Windows 10 build 2004 and ISE 2.7 Patch 2 TEAP (EAP Chaining) is now supported. It seems currently TEAP can only be configured manually for non-domain joined workstations. This is due to the TEAP option not available under the group policy confi...
API access to cdFMC audit log configuration changes
My developer colleague and I (detection engineer) would like to call the following API endpoint:GET/api/fmc_platform/v1/domain/{domainUUID}/audit/configchangesHowever, according to the API documentation this call requires a parameter called sn...
API access to cdFMC audit log configuration changes
Hi there,I tried posting this in the Technology and Support forums and it was marked as spam within minutes. It's been an absolute nightmare to get any clear information on the API endpoints that we're trying to access, and this community is my only ...
Visio Stencil for SM-X Voice Cards
Hello,Does anyone know which pack has the stencils for SM-X Voice Cards? I am specifically looking for SM-X-24FXS/4FXO and SM-X-16FXS/2FXO. I have used the ISR4000 series set and we are starting to roll out the C8300s. I found most voice cards in the...
How to format USB for uploading NXOS image
I would like to use a USB drive to upload NXOS image for upgrading an N9336C-FX switch. From older documentation, it states the USB needs to be formatted with FAT16, however the .bin image is larger than 2GB and doesn't fit. Will the switches accept ...
Testing Duo after NPS Move
I'll be upgrading a domain controller soon and demoting the old one, which is running NPS with Duo. In preparation for the NPS move to the new server, I wanted to confirm Duo's behavior when NPS, Duo, and both services are shut down. The thought bei...
Resolved! SF 300 Latest Firmware
I am new to Cisco - where should I look for the latest SF-300 Firmware ?Thanks in advance --
Rogue dhcp
we have a 9407 and several small business edge switches, we recently had an issue where we lost internet connection in the whole facility, we started troubleshooting using elimination; we were able to identify the switches that created the issue. How...
Resolved! Criteria for a VPNv4 BGP neighbor to show up?
Hello all,I'm having trouble getting my BGP peers to show up in the VPNv4 BGP peering output.For example, if I have a very simple topology of 2 routers directly connected, and I run simple BGP between them using the IP on the directly connected link ...
Routing External IP via VPN Tunnels
I hope someone can help me find an answer to this scenario. We have another organization with which we have a site-to-site tunnel. This tunnel is located at our home office. Our remote sites have site-to-site tunnels to the home office. The other org...
Cisco 9606 - C9600-LC-48YL jumbo frame problem
Hi,we do have migrated our Cisco 6807 to cisco C9606R.we are in version 17.12.5.Since we have migrated we have a problem with Hitachi server Hearbeat connected on C9600-LC-48YL line card.we have the following configuration :NAME: "FiftyGigE1/1/0/20",...
Use voicemail box of phone that was forwarded too
Hi,We do not want to change the global unity setting to have the forwarded device used, but we have one case that we want to use the voice mail box of the phone forwarded to. Is there a way to set this up for individual cases?
Management access from directly connected Anyconnect client 9.18+
Hi,I have an FTD2140 running ASA and use management0/0 for SSH and HTTP management access to the firewall whether on-prem or remote. On the 9.12 train, we can manage the same firewall we are landing on with "management-access management". After upg...
Resolved! Catalyst 9300X Switch Boots as Switch 1 Instead of Joining stack
I'm replacing a failed switch in an 8-switch Catalyst 9300X stack, which includes:1x C9300X-48HX-E7x C9300X-48TX-E (including the failed unit)The replacement switch is a C9300X-48TX-E. I followed the standard procedure:Powered off the replacement swi...
| User | Helpful Count |
|---|---|
| 68 | |
| 57 | |
| 51 | |
| 45 | |
| 42 |
