Hello There anybody can advice methank you
Hello There anybody can advice methank you
Hi All,I have one question :- How can I refrain from providing dedicated bandwidth to my endpoints in entire network infrastructure , For eg , HD call needs minimum 2 Mbps for a good call. So, if I provided Dedicated 2 Mbps bandwidth to endpoint , it...
I'm configuring QoS settings on the uplinks of some 6500 chassis. The QoS is mainly to prioritize telepresence, VoIP, and call signaling traffic through the uplinks. The uplink ports are on a WS-X6724-SFP module. Here are the queue sizes:Q1 - bulk da...
Hi All,Could anyone please tell me how encryption of Telepresence Call ( either Point to Point, Multipoint , Bridged, ) work when encryption is enabled over WAN or when calling external participant outside a company's network? Do we need to share an ...
Hello Everyone,I was wondering if someone would be able to help us solve this we are having while trying to connect our AS5400 with Avaya PBX. We have been able to bring up the PRI Between the two devices ( When i try the following command "show isdn...
i am using Cisco Jabber Video for TelePresence version 4.4 (build 14479) to connect to a Polycom system.i am able to receive audio and video.they are able to receive my video.however, audio is not coming through.the preferences panel of my jabber vid...
Hi experts,This is to check with you whether i could make Multi Point Calls from cisco video phones(99XX)?We have VCS (X6.1) and MCU 4515. I had configured a permanent conference no with 5555 with prefix 8 on MCU.Do i need to Configure both VCS and ...
I'm attempting to customize my TMS email templates (specifically the 'Edit Booking Confirm" template using plain text). When particpants receive their Booking Confirm email one section reads: "The participants will connect using this route". Under th...
Curent setup C40 codec (multiway enabled) VCS 7.1 Conference Factroy configured MCU4510 ad-hoc template configured. This is all working correctly.ScenarioC40 using multiway adds 3 additional particiapants to the conference. When the C40 (Host) leaves...
Hi, We have a situation today someone tried to call internal endpoint- xxxxx (h.323) from public Internet by using below string.Xxxxx@vcse.company.com.au.Where VCSE.company.com.au is the A record for the VCS expressway and public DNS server ha...
Hi,I am using CUCM 8.6.2a to get CTS 500-32 (SW Version 1.8) register. Installed the COP file and touch panel is up. I am able to make calls from a CTS 500(SW Version 1.6.8)(IP Phone SW Version 9-2-1) or CTS 3010(SW Version 1.6.8)( IP Phone SW Versi...
HiIs it possible to integrate the TMS solution into Office 365 for planing a Meeting.TaxSent from Cisco Technical Support iPad App
Hi Folks,I need to demonstrate the functionality of TMS integrated with TMSXE to a Customer. Could anyone tell me , how can I go about doing it?I have already installed TMS 13.1.2 on my VMware Workstation 8.0. I need to integrate TMS with TMSXE so th...
Hi, does someone have a documentation on how TMSPE works and where the info is stored (if it is not OpenDS)?Thanks
Has anyone had any experience implementing QoS with the output of the Telepresence Content Server? I want to mark the packets for multicast output specifically. I reallize there are multiple ways to do this, but I was wondering if anyone has had an...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-15-2025 08:06 AM | ||
07-05-2025 02:11 AM | ||
07-02-2025 07:37 AM | ||
06-18-2025 10:21 AM | ||
06-17-2025 05:26 AM |