TelePresence and Video Infrastructure

Hello;We had new Installation of CUCM 8.0 (1 Pub, 1 Sub) and H323 Gateway, Having 9971 Vedio IP Phones. Normal Voice calls incoming and outgoing are working fine,  when I Enable Vedio Capability from 9971 Phone Configuration, Internal Calls from 9971...

Hi ALL,I have this 525g ip phones that obtain ip addresses dynmically but on the screen of the phone there is no display(no infor abt user,number etc)but the other 504G work very wellplease what could be the cause for thisThanks

Hi,Anyone knows what can cause a failed resolution when making a call through a DNS zone?The DNS configuration is OK so I have no idea what might be causing the resolution to fail.Kind regardsMaciek

I would like to know if the Linksys X2000 ADSL2+ modem router will work with my IPTV service.Thanks.

Hello ALL,an using uc540 i have config cisco ip phones 504 among others and using a dialogic gateway to attribute numbers to the cisco phones they have 5004-5007they number attribution enable calls entering from GSM to reach this phones 5004-5007but ...

We have had some issues with fax machines not being able to send out properly. To fix this we decided to create a cor list that would make it so that incoming fax calls go to an fxs port on the VG and then to the fax and outgoing fax calls to go out ...

Hello,The eventlog can be read via the webpage. But how can I download the complete eventlog file from the VCS via SFTP (eg WinSCP)?Where is this logfile located?rgds, Geert Folens.

Hi,how do I enable http/https access on VCS expressway? I'm able to ssh to it but can't access it through web browser.Thanks.

I have a Gateway SPA 3102. My internet connection is wireless. Can I connect the SPA 3102 to the computer and use it to make VOIP calls?

I'm hitting a wall registering a C40 to our VCS.  It has been easy registering Movi, Ex60s and Ex90s because they are listed as devices on the user page.  What do I need to do for the C40?   Thanks

A user wants to be able to call one number and be connected to multiple sites with that one call. Can that be done by dialing an auto attendant on the MCU and once the attendant is called, it knows to call the other sites immediately? Can that be don...

Good day, we have 2 screens connected to a Tandberg 770 MXP, and one screen is connected to S-video out, and the other screen is connected to the DVI output, I've set the virtual monitor 1 to the DVI out and the virtual monitor 2 to the S-video outpu...