TelePresence and Video Infrastructure

Hi,This question came from our CSC Facebook community.Karthik Ayyappan Hey Any one having Experience with Voip and IPCC let me knowI have a doubt on ICM

Hello,I'm looking for design/config guide and detailed service description of Cisco Health Presence.Thanks in advance for your help.Tomasz

Hi Team,I have one question about UCL license for CTS-XXXX.The result of configuration of UCL for CTS-3010 is as following.CUCM-USR-LIC-ADD        1LIC-TP-MULT-SRN         1EXIST-DEPL-UNDER1K      1include CUCM-PAK        1include CUCM-USR        66 ...

Hi TelePresence Guru'sI have noticed the following in the SIP logs of my Cisco TelePresence Multipoint Switch (CTMS) :SIP/2.0 500 Internal Server ErrorVia: SIP/2.0/UDP 192.168.37.70:5060;branch=z9hG4bK2b0f766df9be6From: <sip:63844@192.168.37.70>;tag=...

Hello,I have a CTS3000 and a CTS1000. The call between these two systems is established as an audio only call, unless I configure the CTS systems to auto answer the calls. Speakerphone is disabled on both IP Phones. Any ideas why this happens?Thanks,...

Why do we need QoS over LANI have CUVC 7.0 and  Tandberg Endpoints?Do I need QoS if this network is only for Video?This is the topology?LANCUVCSwitches4948EPs same switch....Thanks

Hi,Im new to the whole VOIP area and the UC520 so I would appreciate some help.I have set up the UC520 which was fairly simple but I get a Select Vlan ID error in the telephony voice section of CCA. When I try to select a VLAN the drop down list is e...

I am looking for a way to change the IP address that our Agent Desktops use to connect to the CRS Server. Specifically how to automate this process for network wided distribution.Any help is appreciated.

I am running a cisco 2851 as a voice gateway and am getting more intermittent outbound calls that disconnect when the remote party answers. sometimes we hear a clicking noise right before the disconnect. I have checked my T1 controller and it is show...

i am designing a new network with the ASA 5505, please find attached file to see the map.is the ASA 5505 able to route VoIP packets destined to SIP server 2 and 3 simultanously from SIP server 1 according to the MAP ??If i configure a real IP for the...

hi all,I want to know whether one can install the client on blackberry phone same as nokia e71 and register the blackberry phone with cme via wifi. Can somebody provide the link for the documentationRegardsNareh

Hello,i want to setup a CME which has a SIP trunk to a CUBE.Both are running in my test lab.Can anyone help me with the configuration of both? Do i need to setup a User Agent on both or only on the CME?Thanks in advance.regards, Marty

I'm stuck trying to configure acd-aa script version 3.0.0.2 on a CME version 12.4(24)T, I follow the configuration guide of others routers on this forum but don't get what is missing.  I don't have a hunt-group configured cause there is only one oper...