TelePresence and Video Infrastructure

I have a 2611XM with NM-2V and Vic-2xo module. The router runs advance enterprise feature 12.4-21a. The router is able to recognize both NM-2V and Vic-2FXO module but I can not access the voice-port interface mode to configure the FXO. Is there any ...

I just setup a 1760 with CME 4.1. I got the 7961 to register and function just fine for hours, but if I try to register the second phone it works but resets the first phone and it will not register while the second phone is registered. Any ideas?

I have a CCM version 6, a MCU 3515, Gatekeeper and three Polycom VSX7000. I've registered the MCU 3515 as MCU in the Gatekeeper and the Polycoms Station as terminals in the Gatekeeper. The video call work beetween in the Polymcom Video Endpoints, but...

Hi. As I see, the new 3515 is a Radvision mcu again. But from the docs I couldn`t understad if it can be useg to make conferences without the use of a gatekeeper and callmanager.Is there a way to make a conference just using the ip addresses?And anot...

Hi,Does anyone knows if MCU 3515 supports direct ip dialling? we want to establish videoconferences but participants should be able to dial to an IP address without registering to a gatekeeper.

Hi, I have CCM, MGCP Gateway and Tandberg equipment. I would like to know how to determine all the codecs that my equipment could use. Thanks.

Hi, please see the attachment. I have no clue why the video screen appear like this. I don't think the camera is the problem, because it looks correct in other applications then CUVA and the remote user also see the correct color.

Is it possible to integrate Polycom VSX 5000 with CUCM 6.0?If possible how to?Best regards,

hi,We have deployed cisco 2811 router in our network and had installed vic2-2fxs card in one of the HWIC slot.We need to configure fxs card for voip to make a call to branch office and have the following ios c2800nm-ipvoicek9-mz.124-17.bin .The probl...

When I make changes to phones through internet and reset the phones, the changes do not show up on the phone.

How does the TP B2B design works if the different buisness has different carriers. Example I want to setup TP between Company A (verizon) Company B (ATT) and Company C (Qwest). How does that work they would not share a comman MPLS network?And how is ...

anyone know when the relase date for Callmanager 7.0 and if it can be ordered now?