Hello, We have SX80 CE9.6.x, Dual Camera (No speakertrack, third party controller) registered with CUCM 10.5 The Meeting room is a big hall and both camera are facing different area of the hall, I understand One endpoint stream video from one came...
Forum Posts
Cisco CTS-QSC20-MIC will not unmute, but will mute, from the button on the mic when connected to our new Webex Pro Codec. We sre using CE9.7.1 firmware. They do unmute from the touch 10. Is this issue fixed in a later version of firmware?
Hello community, Is it possible to register our Cisco codecs SX80 to expressway-c instead of CUCM? If it is possible what is the type of license we need to buy to activate this feature? Thanks
Hi, We have an SX20 Cisco VC and we have some issues with the microphone. I wants to deploy an external microphone/speaker that would be placed on Cisco system (it will be far from users by 4 or 5 metres) .The table is rectangular and can seat approx...
Hi Does anyone have the physical dimensions of the cts-disp-65-gen4 displays ? I was wondering if anyone has replaced these with something other than a plasma and if so what works ?
Hello Everybody I have a big confusion here in Cisco Webex hosted and Cisco Video Conferencing Infrastructure. I have 5 sites across the world and the requirement is the managers wants to do a Video conferencing with internal and external corporate ...
Good day, A client of ours is seeking help to move their VCS from one building to another building. I would like to know what are the impacts involved from doing this move to another location. I know that:- The IP Address will be changed- Endpoint w...
Running Codian 4320's. Getting tons of the following warnings ... Can't find where to clear them ... CPU's running over 50 percent and most of the time the bridge is sitting idle ???Network Warning getsockname () failed: Invalid...
THE Certs are kicking my butt. Sorry I am a rock. Ok I created the .key and .CSR and submitted the CSR to my CA. I got back the CA and uploaded via WINSCP the CA with .CRT extension. Webadmin = .key and .crtCallbridge = .key and .crtWebbridge = .ke...
Resolved! Pink Glitch on Webex Codec Pro
Has anyone ever had this occur with their equipment? This is on the home screen on the Webex Codec Pro's. I've seen it across mostly rooms with dual TV setups. Rebooting usually is the temporary fix, but it would come back again later on next week. I...
Folks, apologies if this is a stupid question but I can't get a satisfactory answer from a supplier. With Room Kit Plus- cloud registered - can I use the bar as a basic conference phone to dial in to a third party (non-video) telecon?
Hi All, Our Company is using CE9.6.2 firmware for all endpoint. We noticed that when in call the meeting button will be missing. So can we use the Macro create the customize button and show next upcoming meeting information during in call? How to use...
Web browsing issue with my WEBEX Room 55's. I was pushing a template via TMS to three of my systems that have ce9.8.0. One of my template settings is "http mode:" and I accidentally set it to off vice https. So I pushed the template. Than was una...
I would like to know how to get the Cisco SX20 NOM (Norma Oficial Mexicana), i need it so i can import it to Mexico for a customer site. Thanks in advanceRegards
We are trying to pull the directory from a new Cisco SX80 codec running ce9.7.1.30bff6140aa firmware. We no not have this issue with a SX80 codec running TC7.3.17.52b35e9. We are using the AMX MXT1001 Touch panel and NX3200 Master Controller. What is...
