TelePresence and Video Infrastructure

Hi  I had dx80 and room kit. I have configured both the devices as standalone. NAT is also properly configured. But the challenge is unable to make point to point call. I tried using LAN, WIFI, Mobile hotspot also. But not succeeded. But when I creat...

Hi Guys, One of my costumers ask for video conference solution in meeting rooms but he only has CME and CUCM in other branch onlyIs there any Cisco solution for this case? Thanks for all

What is for the C60 Microphone extension cable the Max length ? Can we extend the extension cable 2 times to have a coverage of 20 mtr ?

Customer having complete AV-VC integration in Meeting room and want to have room 55 solution but not sure Cisco room 55 can be used as just display for the Set top box connection or not. Thanks

We need to locate a SX80 codec at a considerable distance from a P60 camera. The connection between the the Codec and the Camera is RJ45 at both ends.   Is the physical connection between P60 and SX80 a standard transport (e.g. RS232) which we could ...

I have a DX80 running CE9.1.6. I see that it has the ability to add switches/buttons for "Room Control", but I would like to know if I can customize a switch/button on the dial screen to run a command that will allow a user to switch the H323 "Call S...

Hello, I feel like in the (distant) past there had been certain TMS versions that would work only with certain VCS-C and VCS-E versions. We currently have around 32 endpoints, a mix of SX, C-series, and MXP lines. We are on TMS 14.6.2 and would like ...

My normal situation involves SX20, 80, MX systems and room kits. In our larger rooms we add Shure mx396/c mics and a Biamp DSP. We take the speaker out to a biamp input, a biamp output to the codec mic in and make appropriate matrix points, change ap...

Hi, I am designing a system where we have 2 x Precision 60 Cameras (via a small switch) going into a Webex Plus Codec. The room uses the supplied Touch 10 panel. The client wants to use HDMI 3 output of the codec to send to a HDMI>USB converter and p...

Please your help to help me with a procedure to get factory reset Tandberg C40. I do not know the PW for this device. Thanks

We would like to suppress the attached 'New version available' prompt we receive for Cisco WebEx Meetings. (This is a Citrix environment, and users do not have permission to update.) Please let us know if there is an easy way to prevent this prompt, ...

Hello EveryoneI want to know that lock and un lock are possible or not without host and guest access method.https://kb.acano.com/content/7/269/en/how-do-i-lock-and-unlock-the-meeting-lobby.htmlIn above document its only possible with host and guest a...