I have a requirement to join to a webex meeting via IP phone. for that, Configured a sip trunk to expressway C which uses a different port (ex: 5564).Configured a route pattern to a test number “11111111” which transfers to expressway sip trunk.Co...
Forum Posts
Has anyone seen a situation where IX5000 to IX5000 calls have poor video quality even though QoS is present? IX5000 to any other unit works perfectly. Also, during a packet capture, Wireshark was saying these packets were Skype packets. Is that n...
I have a problem that installation of ix5000.a customer wants know about color code of table color (basic hickory table)because he wants make a third-party table that matched color with ix5000 genuine hickory table and deploy around.in additional, we...
BACKGROUND - I am attempting to make an H323 call to an external gatekeeper that hosts calls. I currently have an EX90 registered to a VCS (version 8.11) which has a VCS-E (version 8.11) as a traversal client. I am registered to the external gatekeep...
Hello Cisco Team, I am actually facing a probleme regarding the conference bridge on CUCM. The CFB is a CMS which is registred but wthe IPV4 address is not well imported from the Trunk ( Screen shot attached). It should be ".com" at the end but not...
We have spark room kit device its a new device and when we create webex meeting device audio and video is not coming from far end. Far end participants can see our audio and video. Device is not resister on cloud we want to use this device as a ...
Resolved! auto call
Dear all,i do not know my video conf auto call. Could you pls checking for me?
I have a customer that just installed a WebEx Board in their training room. In my training session with them they asked, since the screen is a touch screen, what can they use to disinfect the screen since they are a health care facility and they have...
It looks like all versions of Expressway X8.11.x have been pulled from the Cisco website, has this software been deferred? Should existing deployments on X8.11.x roll back to X8.10 or will there be a new version soon? We've got several deployments ...
I have a Version ce9.2.1.360d0bf spark room kit. I set up with H323 setting, it is available to call out and call in with polycom group 500. But it is not working with calling avaya xt5000. I can call avaya xt5000, but XT5000 call in, it will automat...
When booking a meeting with outlook, I get the following error message on TMS: Conference: Is defective because of a routing problem Any idea where I can search to fix this issue?
Hello, Everyone. I have a 2 Board55 devices and I used a static ip setting for the devices. Today, I figured out which the static IP setting is changed to dhcp setting on both devices. There is an update for board in 2018.12.04. I don't know whethe...
Hello community, We have SX80 version CE9 and we don't require Touch 10 to control the system since we will be using AMX control system for all the AV devices including the SX80. Our problem is we cannot bypass the error message on the home screen sa...
It is not connected to a meeting (Joining meeting failed) if the WebRTC client is in the same subnet as interfaces of the Cisco Meeting Server. From other subnets it is connected.
CMS v2.5 has been released and one of the new features is support for WebRTC for IOS devices including iPhone and iPad: Version 2.5 supports additional browsers, these are:- Safari on iOS for iPads, running the latest version of iOS (recommended). iO...
