Anyone know why I am seeing in the status column of the TMS two different statements ???
Most state "IDLE" or "In Call" which I understand but I have one EX that the status is "ALIVE" the other EX's state IDLE ??
Just curious.
I am considering the following approach for a prospective client who is interested in a Cisco UC solution (900+ users) with video conferencing (20+ rooms) to be added as a second phase. The customer has Lync deployed and has to decide Jabber or SfB f...
Hi, We have an MX300 video conferencing unit which we are troubleshooting an audio problem with. The problem is a whooshing or tunnel sound when in a call.
There is an option under Configuration > System Configuration > Audio > Input Microphone 1 Mo...
Please help, we are getting jabber contacts from LDAP.
How can I add additional contacts to jabber?
SIte A - all users has jabber profile
Site B - does not have jabber profile and we would like to add them to the contacts in Jabber without creating ...
The following is displayed and NTP does not synchronize.
Connection to NTP server not yet established.This might mean that we have not yet had the time to establish a connection, that the NTP server is unavailable, or the the configured NTP server a...
Hi all! I have implemented an Expressway collaboration edge, seems to work fine, except for restricted calls that require forced authorization code.If I log into the LAN (with Jabber obviously) I have no problems for any calls restricted or non-rest...
Buongiorno,
Lavoro presso un cliente con un sistema di telepresence installato da circa 1 anno.
Io sono incaricato di manutenere la piattaforma,ma ho pochissima esperienza a riguardo,quindi mi chiedevo che tipo di supporto
potete offrirmi su una piat...
Good morning, I have a Touch8 panel for an EX90 video unit which is not working. It stopped working - nothing on the screen and only the exclamation mark is highlighted - whilst connected to another EX90 has same result.
Have looked at various forum...
Hello,
I am trying to test SNMP against an SX80 using the CISCO-TELEPRESENCE-MIB and CISCO-TELEPRESENCE-CALL-MIB. I can't seem to get the unit to respond to ANY of OIDs in these MIBS. Are these MIBS not associated with SX80. If so are their any MI...
Hello,
I created a distribution list in Unity. I can get to it by dialing the name of the list in Unity, however, I could not call the list directly from CUCM by dialing the extension of the list. I tried creating a CTI route point in CUCM, as wel...
When I connect my laptop to video cable to share a presentation, the system detects my PC connection. I the tablet I select share PC and I receive "No signal (PC)" message in the tablet.
First a disclaimer: I am not IT. I am an educational videographer with some basic troubleshooting skills who got the the job of assisting end users for videoconferencing. I am an admin on the TMS.
New TMS was set up for addition of new SX20 units ac...
Hi,
We have one MX800 and one MX300 in our office. Both of them connect to our another office by a leasing line. And we are using Cisco IP phone 7841 for each staff. The phone system is managed by Cisco BE6000. But the Video system is not managed b...
