Resolved! default audio codec change
Hi.Just a simple question regarding default audio codec on SX80 (TC7.3) H.323 calls. Is it somehow possible to swap G.711 codec type from ulaw to alaw? Thank you.Marcel
Hi.Just a simple question regarding default audio codec on SX80 (TC7.3) H.323 calls. Is it somehow possible to swap G.711 codec type from ulaw to alaw? Thank you.Marcel
I am having an issue when i call point to point call from MX700 to CTS 1300,3000 where both audio & video is not seen on MXseries endpoint however the image & voice can be heard and seen on CTS endpoint. both devices are registered to CUCM 9.1.2. W...
Hi Experts,I installed Cisco TMS 14.4, during installation all done fine, but at the first connection I got error in pop-up The Ajax Request Failed...TMS ERRORCOOKIE{FF44A030-7F95-461C-8065-615FCE335F7B} var TMSError = { toggle: function(tableId) { v...
Hi guysMaybe some one can help me out here. I am looking for a CAD file of the CTS 3010. That would be a *.dwg file. I need this as a client requested a meeting on monday and want to see the unit in his room. Thanks!
The TMS running 14.3.2 stopped displaying call data and can't find out why... SQL and TMS are on the same server. No warnings or errors reported from server and all TMS services are running with no outward issues???When I run a CDR report their is n...
I have a single unit of MX300 in an office, to do external h323/sip video calls. There is no CUCM or VCS involved.there is only internet avaliable.how to configure the unit as a stand alone to make connections with other external companies????
Hi everbody,We have been using C90 codec and TC console and can easily set up a conference with multiple monitors:1st monitor: main camera2nd monitor: presentation,3rd monitor : remote camera. SX80 have also 3 monitor outputs. Can we set up the same ...
I've problem to send special characters to E1 port of Cisco Voice router Cisco 2911. I made dial-peer with special characterdial-peer voice 20 pots destination-pattern *77.# port 0/0:15 forward-digits all no register e164 no sip-registerbut if I...
Hello,Cisco IP Phone DX650 can be configure like a standalone video endpoint?RegardsLeonardo Santana
I have a 1080p 12x Precision HD camera from a C20 codec which is not responding despite its power light being on. There is no video output - the PIP on my home monitor is blank. I have also tried feeding the camera's HDMI output straight to a monitor...
Hi all, A camera of an SX20 we bought the other day, tilts / pans very unsmoothly by remote control.When we keep pushing arrow button on a remote control, LED on the camera flashes upon receiving IR signal, and the camera starts to tilt / pan but it ...
Cant seem to find a good install/configure doc for this thanks
While the device config in cucm is set to Auto Answer, the DX80 will not auto answer - just rings and rings until manually answered. This was working for some time, and suddenly stopped working.
Hi all,I have an SX 20 with a shipped version " : (Shipped Version : TC7.0.2).After a long time of use, we did an upgrade to the "version : TC7.2.1". After this upgrade, we have found an error according to the license, and the system can...
Dear All, We have two cucm Clusters in Different Locations between that clusters i createdInter-Cluster Trunk (Non-Gatekeeper Controlled) Now all are working fine Between Clustersaudio calls & Video calls between sccp 8945 phones , but...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-30-2024 03:24 PM | ||
07-29-2024 10:10 AM | ||
07-29-2024 12:01 AM | ||
07-24-2024 06:15 PM | ||
07-22-2024 07:29 AM |