Hi All, there is a problem i am trying to register DX80 with CUCM 10.0, i have uploaded the COP file for DX80 but still i am unable to see DX80 in the device list.how can i register cisco DX80 with cucm.
Hi All, Is anyone know the link to download virtual edition of telepresence servers(VCS-E & C, TMS,Content Server,ISDN gateway,Lync Gateway)? I had gone through the cisco webside and download center but no where found the same. Thanks in advance BRYa...
Hi All, I was looking for some documentation on integrating TMS(13.1) with CUCM(8.6), I would also like to know about the integration of TMS with Microsoft Outlook for the purpose of meeting scheduling and OBTP functionality.Any information on the in...
cisco jabber internal --- EX 90----- video not workingcisco ip phone 9971-----EX90--------Video Not workingdx 70 -Ex90------ Video workingAudio is working fine on all the devicesBoth cisco jabber and DX 70 in same device pool, Both are registerd to c...
I have a CME 7.0 and have Cisco IPphone registered using SCCP, however I need to add a 3rd party SIP device that requires SIP registration, If i configure the SIP registrar would it create any conflict of any kind ? Tks
I have vcs expressway in our dmz, vsc controller inside (X8.5.1), to mcu 5310 on 4.5(1.55).External Polycom HDX calls work fine, but if they come in Polycom Group 500, we receive video but no audio, and there is no audio or video out to the external ...
I am having an intermittent issue between two of our SX20's and our 4515MCU. Sometimes when the calls connect we not getting any video to the SX20 from the MCU. Whenever this happens I see the following in the MCU log:11514011:55:05.435 H.323Warnin...
Hi, we are considering the use of Cisco Telepresence TCS + TMS but have a mandatory requirement for safety marks / hashes / (whatever) in recordings so they can have legal force. In the docs I didnt found any info about this subject. Can someone help...
I just finish connecting my SX-20 and now I need to call some one out of my net work so I know its connected correctly. All I need is a number to call to connect my telepresence.
hey,i am in big trouble, i have cisco sx20 but it cannot call to polycom HDX 8000, when i am dialing video call it automatically connects it audio call.Kindly help its very urgent.Thanks,
Hello,I check the specs for the SX-20 that we already integrate with an external micrpphone mixer and work well. It tell 1/8'' 4 contact.On the specs of the SX-10 there is also a 1/8'' 4 contact but they add ( only Cisco TelePresence Table Microphone...
Have Cisco Emergency Responder ver System version: 8.6.1.10000-9. It suddenly stopped sending emails but still sends the voicemail notifications via the same smtp account. Looked at this but was unable to get any results from it:http://www.cisco.com/...
Hi all How can we live stream from cisco telepresence content server to popular streaming websites like youtube and all .What all the requirement .Does it require any other devices other than content server and vcs ? Thanks
Hello.Previously always paired the Touchpad by connecting directly to the Codec. Unit was moved to a new location and decided to try pairing the unit by giving it a static IP and pairing over the network.The TouchPad pairs correctly but displays a f...
Hi Team,While in a call in SX20 i am not able to share a presentation, checked without call also same presentation is not getting on second display even system as a Dual display license.Second display shows blank and black screen please share if any ...
