TelePresence and Video Infrastructure

Dear All Currently i have new project with Cisco Telepresence server , Conductor server , TMS , VCS-c 2 , VCS-E 2 , my Questions are the following below : - why i need Cisco Telepresence server ?- why i need Cisco Conductor server ? MCU can handle vi...

hello All,pls can NAT on a C40 codec registered on a VCSc allowoutbound calls without using the VCSe papa

Hello, I just found an issue with TMS 14.1.1, the case is whenever endpoint x, and endpoint y for example and in a point to point call, and there's a booked conference which is going to start, that has participant x, while x and y are currently in po...

Hi all,C40 software - various but last recorded issue TC6.3.1Calls are H.323 using the E.164 for dialling.We have noted a really odd issue with some of our C40's. These units are being dialled directly from an MCU (I believe a Codian 8510 - these are...

Good AfternoonWe have a  CTS 3000 system at our head office in Slough, and we were wondering if there is any way of a second participant being handed off yo the main codec when the first participant disconnects? Example:The first meeting we had was a...

Had configured a cisco EX90 with a static ip address of 172.19.100.40 and after a few days, when trying to connect the EX90 to the network, it was going to the maintenance mode and was giving an error like " The system has encountered with a problem ...

Hello, colleagues!We have two VCS Control devices with support contract, spec is below. The question is: is it possible for us to upgrade to VCS 8.1 with CON-ECDN-SCNTRLK9 ? Is it possible to use one device as VCS Control and another as VCS Expresswa...

I'm webbed into a C20 and I noticed there is a way to program the softbuttons using actions.  Does anyone know what command/format this field is looking for?  I'm ultimately looking to turn one of the softbuttons to do the same as the "select configu...

Dear I have a CUCM 9.1, MCU, CUP,& sip ip phonesI want to understand what is SIP registrar in MCU, I have  read the guide but it is not clear for me.Anybody can give a short brief how it will be useful with my devices.Thanks

Hi.I'm trying to solve one simple problem. First we have a system which only accepts IP address as a call destinationand the destination MCU is designed to accept video call using standard format <number>@<IP address>.Is it possible to do some redire...

Is there a good document to use to troubleshoot a TMS that doesn't get status back from tms checker on cisco. We have over 350 endpoints and getting release keys is critical to doing upgrades. Our TMS is definately (verified with cisco) under SmartNe...

Hi Guys,I'm just wondering if anyone has made a trunk between VCS-C and a Radvision GK running 7.7 software? I've not seen a Radvision GK before so just wondering if it's possible and if there are any issues or things to consider.Thanks,  Rob 

Hi AllWhat is the minimum and maximum hardware operating temperature for a Cisco C60 Codec?If I log onto the system and pull an xStat I see the systems hardware temperature is at 76Also is the above reading in fahrenheit or Celsius?I see in the manua...