TelePresence and Video Infrastructure

Hello,I have a customer who has installed the ISDN GW 8321. They are attempting to register to their VCS Control via H.323. It will not register. When they review the VCS logs, they can see the ISDN GW has attempted to register, but it reports that t...

I have two c40 endpoints that are running TC6.1.1. Is there an upgrade path to get to the latest release?Also, my TMS is telling me that the most recent release is TC6.3.0. However I am seeing 7.0.1 on the c40 downloads page. Can I upgrade straight t...

I give a mxp 95 at a far location over a satellite link at 512 k. When I try to establish a call to it from the mcu the max rate the call will establish at is 192k. There is no max bandwidth set on the codec or mcu. Any ideas

We recently purchased a Cisco Content Server and is runs on a UCS C220 server...There is a dedicated NIC for CIMS functions in addition to the 2 standard NICsDo I need to connect 2 Ethernet ports to this server?It appears that     "Shared LOM—The 1-G...

Hi All,•1. If TMS crashes ,after reinstalling the software from scratchCan we restore the system configuration without having to manually re-configure everything?•2. SQL server may have standard backup at the database level. But application has more ...

We are currently running two TMSsExisting non-redundant TMS is running Ver 13.2.2 with approximatly 850 endpoints, 4 VCSs, 5 MCUs, Provisioning Ext, Jabber, etcThis continues to be our production TMS that is used dailyWe have setup a new redundant TM...

Hi,One of our clients have TMS... and they add domain to the firm, so now they had 2 domains (and also two active directories)After they did it the Scheduler is not working for the people with the new domain.Can i register 2 domains in the TMS or jus...

Dec 26 10:16:05tvcs: Event="Decode Error" Service="SIP" Src-ip="192.168.30.53" Src-port="1273" Dst-ip="10.54.2.2" Dst-port="5060" Detail="Bad method in request line" Protocol="TCP" Level="1" UTCTime="2013-12-26 15:16:05,881"Dec 26 10:13:36tvcs: Event...

Please let us know if the provided step helped you to get the led status and sequence on CTS-DISP-65-GEN3Problem is no dislpay Led sequence Orange 1   time, Green 1 time continuouslyTried factory resttingRegardsMr Swarts

Dear All,currently i am deploying telepresence on my customer.i still confuse about design.my topology is like this:C60 --- VCS-C --- (DMZ) --- VCS-E --- Internet               |               |          MCUc60 and mcu is register to vcs-cMy question...