TelePresence and Video Infrastructure

I am doing a project.I have a video-conferencing system  at my college.Cisco telepresence precisionHD 1080p 4x camera(the url of this camera is - http://www.cisco.com/en/US/products/ps11335/index.html ) is used in this video conferencing system.In my...

Hey Guys,I manage a Cisco network with 10x Cat 4506s and 1x Cat4510R all GIG POE. We run Cisco VoIP also.My question is, do I really need QoS on the switches? We have no WAN sites, this is all on a campus fed by fiber. We have about 400 IP Phones, 50...

We have an SX20, recently installed, in an environment of mixed 6000MXP and C20 units.  When we conduct multi-site calls with this unit over our bridge (an older piece of equipment, Codian) we have problems with some pixilation when the floor passes ...

We have an SX20 running in an environment of mixed 6000mxp and C40 codecs with an old Codian/Tandberg bridge.  Whenever this codec is involved in a multi-site call through our bridge, we have video quality issues when the floor changes from one site ...

I'm looking for guidance with extension microphones and the required adapters/cabling for them.I have an Edge 95 MXP installed in room, the audio quality is poor hence the need for extension microphones.Thank you in advance

Hi Guys,I am having an issue establishing a inter region video call between 2 SX-20 endpoints.Call works fine when I move them to same regionI have made the CAC to unlimited for video on the LocationsI have played with the Video Bandwidth in the regi...

Hello,Next week i'm going to register several SX20 and MCU 5310 to CUCM 8.6.First question: do in need to downgrade to TC5 in order to do it with cucm 8.6? and can you please send me some printscreens of MCU and sx20 that already install in this conf...

Hi Guys,Hoping someone might be able to help. We have a client who would like to turn each C90 codec from a T3 system into a stand alone vc system. I am aware that each codec has bespoke software installed with relation to whether it's a centre, left...

Hello,I am currently planning a VCS/Lync integration design for around 3000+ Lync users but i just wanted to santiy check the theory behind the call licenses required on VCS.The way i interpret this, if you use a 'Lync Gateway' peered with a VCS-Cont...

We are woking on migrating from a single instance of TMS 13 to a redundant version of TMS 14 and running both the old and new TMSs concurrently.In working on the config of the new TMS 14, I have a browser open with one tab for each of the 3 VCSs and ...