I need to extend a Mic60 microphone from MX800 CODEC but it should be more than 20 meters and allow me to change it from Eruroblock to Mini Jack for in the end and to be able to connect and disconnect. I am thinking of using a BELDEN 8451 cable or ...
Hello @ all, we've got a Codec Pro which should get the sum of all microphones from a DSP via Line Out. The 8 Mic/Line inputs of the codec should be settable between these two modes but there is actually no possibility to change the "Type" like in SX...
We recently enabled SSO for our Webex site. Since this is a org-level setting with no exemptions, our Webex service account used to connect to our Expressway C appliance now fails to authenticate on the Expressway. What's the proper way to establish ...
Hi Is it possible to get the scripts(like python or any) for CMS to configure API's? At the moment we are manually configuring them, which is a tedious jobs if we need hundreds of spaces to be created. We are aware of POSTMAN but a more granular scr...
Hello Everybody, I created a coSpace Template "MyTemp" where I used URI generator: $.space (URI user part with variable)Then I created a new coSpace name = "Project 2" (based on template "MyTemp")I am using a CMS email template where I put varia...
Hello support community, I'm just in the process of introducing Cisco CMM/CMS so that we can phase out Cisco MCU finally. I have configured this in a lab and introduced the VNOC team to it, however they have presented me with a list of issues with th...
Are there any codecs which come with a video out and a webcam video out? If not, what would I need to utilize my codec camera as a webcam? I need to sometimes initiate web conferencing calls in my VTC suite. I would like to integrate my VTC camera, m...
We recently upgraded to a CMS/TMS/CMM system for our group teleconferencing. Most of our endpoints are DX80 VTUs. We are having issues with a few of the DX80 VTUs entering spaces with hard mute issues; they enter a space hard muted requiring one o...
Hello, we want to create a custom action button on a room 55. After uploading the image (MS Teams Logo) it is shown bigger on the webinterface as on the the Touchpanel itself. Also it does never fill the whole button, just like 2/3rd of it.Does anybo...
We're looking to refresh our existing cisco telepresence end points to the newer room kit systems. What is best practice for connecting the touch panels, do you connect them to the corp LAN or run a cable directly to the Codec? I seem to be getting ...
