TelePresence and Video Infrastructure

My question is...   When a C Series or MXP endpoint gets an IP address via DHCP, can the DNS host name be somthing other than the system name.We are aware that a static IP address and DNS entry can be setup to do this, but our preference is for DHCP ...

Hi,In MSE 8000 chases I have 8510 and 8710 cards. MCU 8510 supports Auto Attendant. If any voice call is placed on MCU 8510. Call can join the conference which is held on MCU 8510. I need to join a conference which is held on MCU 8710. I am unable to...

Hi everybody.  We are experiencing some troubles with our VCS.  The web access becomes slow randomly and in order to fix it, we need to apply a reboot. But yesterday it rebooted itself with no apparently reason. In the following picture we can see th...

I've installed VCS using the  'Single VCS Control Deployment Guide' for 7.2.2.  After following the  directions, I'm unable to register an E20 to VCS.  Below are the network  logs from VCS.2013-07-01T18:39:23-04:00    tvcs: UTCTime="2013-07-01 22:39:...

Hello all,I am looking to expand a small video pilot we have going on in which I have a few endpoints such as some EX90's and a couple of MX300's.  We also have them implemented with an MCU 5320 with a couple of licenses and a VCS.I am looking to ord...

Hi Experts, Need to know some basic queries related to EX60/EX90 [EX90/EX60 is registered with CUCM 8.x]..1 ).how many lines are there in EX90 and EX60....2 ). Can we configure multiple lines , if registered  with CUCM.3 ). Can we lock, keypad of EX9...

Hi,I have a few contacts on my local phonebook that i want to show them on the main screen/home page as favorites folder.Is it possible or maybe there is a better way?Best regards.

Hi everyone! I'm new to TelePresence and I need some help.I have a network comprised of MCU4501 with a C20 on the client side.For some reason, the teleconference disconnects every 100 seconds and reconnects a few seconds later.I couldn't access MCU45...

We see a strange issue in Cisco C20, where in the Video input from Camera is not detected in the  Codec - But the far end is able to see the Camera video if we are in a call.Xstatus Video Input says - Not connected.We see the same with TC5.1.6 and TC...

Hi,I encountered problem on Jabber users logging in via VCS Expressway as external server.Login error is "Wrong username/password or domain". Internal Jabber users using same credential can log in successfully via VCS Control as internal server and c...

We already have 1 Polycom unit added to TMS. I have put exactly the same settings into a 2nd Polycom unit but TMS gives the following error 'Update failed on: Software version: hostAddress:10.201.132.230, description:send command 'Volume get' failed,...