HelloThe second line of ATA186 does not work.I add a new ATA with the MAC address changed on the first digit (01).But the "new" ATA does not registred ...Thank's for your help
HelloThe second line of ATA186 does not work.I add a new ATA with the MAC address changed on the first digit (01).But the "new" ATA does not registred ...Thank's for your help
I have a CCM6 server behind a 2821 router connected to an MPLS network. The MPLS link is configured for SIP trunks. If the Telco is forwarding 10 digits down the SIP trunks to CCM, is there a way to strip that down to 4?
We have a VG224 that after so many days it stops with dial tone to all of my fax machines. Here is the version ROM: System Bootstrap, Version 12.3(7r)T2, RELEASE SOFTWARE (fc1)rcw-vg224-1 uptime is 15 minutesSystem returned to ROM by power-onSystem r...
Hi all!I am installing Unity 4.05. Following the 4.05 install doc, I got up to installing Exchange 2000, rebooted, no problems. I then install Exch2000 sp3, reboot, and I get an error saying that at least 1 service did not start..In the event-viewer ...
I just got done doing the presence installation and did the configuration tasks on the CUCM 6.0 BE we have. It's asking for the CUCM information and I gave it the hostname, IP, and password of it but it's not liking the password. Where is it pullin...
Have Enterprise customer that standardized on Dell servers. For appliances (UC Manager) others are acceptable. But for systems running Windows, they have policy that it must run on a Dell. Have found references in Cisco docs for 5.x that say Dell ...
Hi Guys,I have 4.1.3 SR5 and after a DN was deleted, calls are still ringing through to it. I have seen other posts with a similar problem and they suggest there is a bug for this for which i need the I.D. I have tried searching for it but cannot fin...
what is the proper way of updating the after hours greeting. I have a greeting already in the system and I have the new greeting that i want to replace it with. Can I just copy the wave file over and replace the current greeting? Do I have to shut ...
Hi Guys,I have created Callhandlers with 4 keys for one of my sites. But, I couldn't able to transfer the calls to External numbers. One of the four external number is 147589XXXX. We use 9 for external dialing and I have allowed the route for externa...
Cisco amigos,I'm just wondering if anyone knows of anything regarding this topic. Is it possible to answer calls using any means in a citrix session?
Hi all,I have call manager 5.0(2) in a LAB enviroment and was able to login to the admin page. But for some reason I am no longer able to login to the admin page when I try to login, I keep getting prompted for Username and password and the address b...
Fellows,I was wondering if you know a workaround for this issue.While runing the DMA on the publisher, the file is greater than 2GB, hence the backup for the DMA fails, do you know how we can get it go work if the size of the file es 2.4 Gwe cannot g...
I am running Unity 4.0.3 sr1 ES72 with Exchange2k offbox. I am adding a secondary Unity server and just completed the installation of the secondary server but for some reason I am seeing a ton of DCOM error in the system log of the secondary server, ...
Does AvUMRSyncSvr have a certain time that it tries to run again. I mean if there are files in the UnityMTA\failed folder and AvUMRSyncSvr is run the the mail is delivered. What is the time?
Can Cisco MPE be integrated with multiple CUCm clusters
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
05-09-2024 10:27 AM | ||
05-08-2024 05:23 AM | ||
05-01-2024 06:07 PM | ||
04-30-2024 05:36 AM | ||
04-18-2024 04:56 PM |
User | Count |
---|---|
5 | |
3 | |
3 | |
1 | |
1 |