Hi,Is there a way to positively identify the OVA and profile used when these applications were originally installed? Aside from looking at number of vCPU, RAM and disk and making a guess. These are existing installation, we did not have any prior...
I want to upload over 350 route patterns using BAT Tool in CUCM 9.1. All patterns must have their Called Party Prefix Digits (Outgoing Calls) Field containing 10 numbers with the number "0" at the begining. The Problem is the CSV file removes the lea...
Dear team ,Attached the current cucm licenses utilization and we need to add new licenses for future expansion.would you please advise which type of licenses to add according to phone models we have the below phone models533x 782140x 885140x 884515x ...
Hi Guys
I recently installed CUACA v.11
Only certain users appear with BLF status on the Operator Console
All users are identical on CUCM with "Allow Control from CTI" enabled where ever it can be.
The only thing I noticed that is different is that ...
Dear team,As the IP Telephony became most critical as all companies are working from home we need to achieve high availability per sites.we have two data centers but all collaboration services are located in one site and in case we have issue like po...
I'm setting up Expressway E and C clusters for MRA. I'm looking at the documentation for CSR process and it's not clear how the Xway C works with the Let'sEncrypt CA. Let'sEncrypt must be able to reach the cluster for domain validation. This is fine ...
I have a UC520 (I know it's EOL long ago) but I was wondering if it is still possible to buy a support contract so I can have access to software downloads for IOS/CME/CUE?I would like to update the CUE to a newer version.
Hello everyone, I am at this moment changing the network domain for a customer.I began with the publisher.show network cluster and diagnose module network are ok.show itl are ok with my tftp server (those I haven't yet change but they show the good d...
Hello,We have had a UCM. v10.5.2 running for several years using VMWare currently VMWare Fusion Professional Version 11.5.3. Recently UCM is consuming significant internal ethernet bandwidth to the point where email and web traffic is significantly a...
I've been asked to use Jabber to connect to a service. I'm running Mac Os 10.15.4. I have tried with Safari, Chrome, and Firefox. I same the same problem with each. I have also tried on a second Mac with similar specs and have the same problem. I ge...
Hello,We are facing the following issue. While searching in the Global Directory for First name of specific user only I am getting an error message: "XML error [4] Analysis error", but can search other names ok... Tried on several desk phones , all ...
Hi All, I have a project to upgrade Collaboration Cluster which contains (Call Manager, Prime Collaboration Deployment and Standalone PLM), from 10.5 to 11.5 Do you have any suggestion, which one should I upgrade first? Thank you,Best Regards,Rinaldy
Hardware Cisco ISR4331Software versionCisco IOS XE Software, Version 03.16.05.S - Extended Support ReleaseCisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S5,Getting Ip Trust List Authentication failed for Incoming R...
Hello,does anyone know if the CUCM 11.5 or 12.5 is capable to generate a SNMP Trap or a Syslog message when it can´t connect to cloud services like APNS or Cisco Smart License?If yes, could you provide some tip regarding the message itself, possible ...
I am finding that the CUCM/IM&P 11.5(1) SU2 servers is having a strange issue. We have a couple of users that are not searchable by name, they show as offline. But if we search by the email address then we can see the users and chat with them. I am n...
