Hello everyone! Well, i have always had a doubt regarding to upgrade the servers. If one server is turn-off and then assign a service-profile (with host package firmware in default) to it, will it upgrade before to work? Should i configure that polic...
I recently downloaded the UCS PE to prepare for the deployment of a UCS solution consisting of:- UCS 5108 Blade Server Chassis (with 2x Fabric Extender Cisco UCS 2208XP)- UCS 6296UP 96-Port Fabric Interconnect Appliances- UCS SmartPlay Select B200 M4...
HI, I want to upgrade UCS C-series standalone rack mount servers to 2.0(13n ) from 2.0(3f), does any one know the process for the same. Please clarify. Thanks, Dinesh
Hello, I am just trying to have better understanding of UCS vNIC and it's drivers for ESXi hypervisor. I cam across 2 different drivers for ESXi hypervisor 1). Native ENIC driver version 1.0.11.0 2). ENIC driver version 2.3.0.14 Can some one sh...
HiFollowing is our current setup. 6248 FIs, 5108 IOMs, B200M4 blades with VIC 1340 connected to N9K & MDS 9148S. We have enabled QoS System class - Gold (Cos - 1, weight 7), Silver (Cos - 2, weight 3), Best Effort (Cos - any, weight 5%) , and FC. QoS...
Hi, We're using Cisco IMC Supervisor 2.2.0.1 standard. I've set it up so that servers are divided into three rack groups: "Accounting", "HR", and "Finance." How can I limit a user so he only has access to the servers in the "Accounting" rack ...
Hey guys, Got a new UCS system setup in two separate DCs, however the Windows Server 2016 installation is taking in excess of 2 hours to complete on a blade, it seems all parts of the install are going slow (copying files, getting ready for install...
Hello, I'm a n00b to the Cisco UCS platform. I have a Cisco UCS 5108 with 4 blade servers, two 6324 Fabric Interconnects (with 8GB SFPs) that should connect to a NetApp 2650 storage (with 16GB SFPs). The storage has been setup, SVM ready, FC ports ar...
Regarding Pin group, in the creation I can define two targets one for fabric A and another for Fabric B, in an example in which vhba is pointing to fabric A, in case of failure it will throw the traffic to the other defined target in the pin group?, ...
Hi, Does the Cisco UCS 6324 Fabric Interconnect support: Direct connection to Storage using native Fibre Channel? Zoning? VSAN?
Hi We have 6248 FIs, 5108 IOMs, B200M4 servers, VIC1340 with Windows 2016 Hyper V. The chassis / servers will be in production in another 10 days. We used to perform infra updates through Firmware Auto Install / Install Infrastructure Firware and f...
Frequently I find myself looking at the service profile association FSM output that is stuck for long time at particular step. I would like to be able to look at finer details of the SP association with the server. I have syslog output set at debug ...
All, Been doing some research on boot options for Cisco UCS. One item in the list is "Remote Virtual Drive." I can't find too much in the documentation, or via searching online about it. There is a brief mention of it in the UCSM Server guide. In a...
Hello, I am having difficulty accessing the XML API using the same methods previously employed to access CIMC 2.0,1.5, and 1.4 I do see there is a new RedFish API, but there is also still the option to enable XMLAPI from the Admin section and I sti...
Does anyone know of any reports for Courtesy Callback or do these need to be manually created? Basically looking to see if I can find out how many people selected to get callbacks and how many were successful or not.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 12-03-2025 07:07 AM | ||
| 11-30-2025 06:22 PM | ||
| 09-23-2025 12:33 PM | ||
| 09-09-2025 06:54 AM | ||
| 09-05-2025 12:03 PM |
