Everyone,
I have installed UCS Director 5.3.0
I am trying to setup the Amazon EC2 Cloud and I keep getting an error message (Cloud with name Amazon is not reachable)
This is what I see in the error log, but I have no clue what could be causing th...
Greetings,
We are currently working on getting Windows Server 2016 deploy via Microsoft Deployment Tool Kit but it seems that the OS is not able to access the boot partition per BSOD error code
We tried using Legacy and UEFI BIOS and still same iss...
Hello
Since about one week I have following problem at 2 servers - they crash and need to reboot them by CIMC, it seems to happend during some disk operations. One of them crashes after 0,5..1h of running (VM with CCTV records), the second one after ...
Hi All,
My N5K going down yesterday and cannot bootup. We already replace the hardware with the new hardware.
But after changes, 1 of the solaris box san connectivity keep flapping. the log as below:
2017 May 23 16:59:46 MBBKULSPJY100 %FLOGI-5-MSG_...
I've got a C220M4 with a MRAID12G RAID Controller that can't find any drives. I've pulled two working drives from another recent C220M4 and still can't find the drives. I've checked cables and UCS can see RAID card and says it is fine. Any thought...
We have a Cisco UCS 5108 AC2 chassis that currently has 4 x 1 gig SFP's for networking.
We managed to acquire a 10 gig ethernet switch so assumed we could buy a couple of 10 gig SFP's and away we go.
I've been told by my reseller that there are no ...
Hello I have a question on UCS C-Series. I hope someone can help:
We have a Cisco UCS C220M3 Rack server and because of some limitations on the vlans we added a VIC 1225 Card on it to attach it to a pair of Fabric Interconnects and provide those vla...
We have integration of UCSM with LDAP server however want to enable SSL for the LDAP authentication. There is no document listing the procedure for this. Can you please let me know theclear and detail procedure for the same like where we need to gene...
A S3260 Storage Server seems to count as a chassis.
- Does this imply that a max configuration can have 20 S3260 systems ?
- Can one mix blade, rack mount (C-series) with S3260 ?
- Can by means of a storage profile a SP on a Blade use storage of S326...
one of UCS blade( B460 M4) suddenly restarted and were showing "memory management" error, i check in detail for the ram but it doesnot show any error, what is the reson behind this error
We faced a major issue while migrating our UCS chassis FI connectivity from N5K to N9K. We are still pondering what could be the issue.
We were migrating network connections of our production UCS from old Cisco Nexus 5k to a new Nexus 9508. Each FI ...
We had 5 UCS domains, which we wanted to upgrade from 2.2.3d to 2.2.6d.
We used autoinstall.
3 out of 5 worked ok
2 were hanging "waiting for activation to complete on peer fabric interconnect" at 97%
see attachments.
We opened TAC case; however, du...
I have the following config on Catalyst: logging source-interface Vlan1024 I want to be able to specify an interface vlan as the source-interface on NX-OS. The only option I can get is to use a loopback interface as the source-interface, but I want ...
Hello experts,At the Cisco IMC Supervisor 1.0 v1 Lab at the dcloud I found three devices which are called "Cisco C-Series IMC Emulator".Now I'm wondering, if it is possible to get this emulator as download, like the UCS PE.This would be useful to hos...
I have already gone through the document posted in below link but it do not work as we are running Cisco IMC Release 1.4Cisco IMC Plugin for Nagios (version 0.9.3)Do we have a lower release Nagios plugin which i can install it on my environment for m...
