Hi Experts:
I have a UCS managed C460-M4 and I would like to REDUCE SPOF for my Management Network [KVM Console] which is currently limited to Slot 4 with my Cisco VIC.Firmware is 2.2(5b).
Q1. How to achieve it if VIC in Slot 4 has hardware issues ...
Hello,We have a validation tool that checks for UCS cabling best practices. For End-to-End FCoE, the tool checks for 2 FCoE links connected from Nexus switch A to Fabric Interconnect A. We capture the same by using the below XPATH of the UCS XML out...
Hello everyone,
We have a doubt about migrating from normal Esxi to Cisco Custom Esxi,
Could you help us, please?.
Is the procedure like a normal esxi update?
Should we be able to deploy windows and other OS's VM in the Cisco Custom Esxi?
Thanks a l...
Hi,
I need to confirm what is the WWN should we use when configuring SAN target primary and secondary when configuring boot policy.
I think this should be the WWN of the SAN storage controllers
So what should be configured here assuming that we have...
Hi,I decided to upgrade UCS from version 2.0.1q to fresh and new 2.0.5c (on 6120XP).After I had disabled calling home, I activated the new version of UCSM (adapters, CIMC will be updated using a host fw pkg later).And some nasty thing started to happ...
Hello
I'm facing the following situation with a UCS infrastructure : when shutting down FI - A uplink , all vNICs fail over to the second FI B. At most one ping is lost. When re-enabling the uplink , the failback occurs but I loose almost more tha...
In a B series UCS , sitting on FI A ( Primary ) management interface console , can we reboot FI B . If so how ? I need to know the command.
Can FI be able to reboot from UCSM ? Again, if it is possible , how to do that.
I am planning to direct connect C-Series C220 M3S with P81E VICs to 6248 FI. UCS Manager will be 2.2(1e).
According to C-Series integration manual, C-Series 220 M3 servers can be directly connected to FIs when UCSM is 2.1(2a) or newer.
http://www.cis...
Hi,
I have B200M3 and B200M4 servers in the same 5108 chassis. UCS 2.2.5a
B200M3 include 2 VICs : 1240 with 1280 and no faults reported
But the B200M4 include 1340 with 1280 and it give fault: Adaptor mismatch. with description: server 1/5 has inva...
We recently got a Mini and I am setting it up. My experience up to this point has been with the UCS 'Classic' [as Cisco is now calling it...really....I feel like I just got started on it...anyway]. My problem is with the network connections from th...
Dear community,
We assume that we have a problem with our UCS Central config-all backup.I did an import of an config-all backup from our production system to our testing instance of UCS Central which is connected two our UCS Platform Emulators. ...
I have a rather strange case where:
1- I am authorised through the "test aaa server ldap" command using the settings I've configured on my UCSM authorization settings. I can get authorised using both the domain name and the AD's IP.
2- however whe...
I just stepped over a nasty feature: 3.1.1e release is now out. However, the upgrade failed ! why ? B200-M2 with Palo adaptor is no more supported !
Check the release notes
Deprecated Hardware and Third Party Adapters No Longer Supported in Cisco UCS...
