Installing the cluster for the first time... hosts are in vCenter, storage VMs are up, networking appears to be solid. However under the 'Create Validation' phase of the installer I get this message: vCenter SSO server reachability check SSO server...
Forum Posts
Resolved! ESXI UCS native vlan
Hello,After installing ESXi on a server blade, I tried to assign it an management IP address in a vlan that is configurated in UCS for lab, but not native. The native vlan for this blade is using the same vlan as production. I would understand the p...
Out of sudden, I can't browse to my UCS Manager virtual IP and my FI-A. I can only ping the FI-A management IP but unable to see the UCS Manager web console. I can't browse to my UCS manager cluster console as well. Only FI-B is working.What have bee...
I have a UCS C240 M5SX that I have been using for testing our product. I had been doing OS installs on it and have been successful for the past couple of months. Now when I do an fresh OS install, the boot option is no longer present or available. ...
Based on the HXDP 4.5(x) documentation I can see that the latest version that 4.5(2e) HXDP support is FI/Server firmware 4.2(1n). Have anyone here tried to build HX cluster 4.5(2e) with server and FI firmware 4.2(2a)?
Will there be any issue if I'm about to connect my C-series server to my FI cluster with lower firmware version? My C-series server is with 4.2(2a) and my FI is 4.1(3c). In this case capability catalog will not working I guess since the version gap i...
Resolved! VMware ESXi 7.0U3g - OEM Custom ISO?
Currently have 4 B200 M4 servers running VMware ESXi 7.0.3c.ESXi was installed using Custom OEM Image Cisco-UCS-Addon-ESXi-70U3_4.2.1-a.To address some issues, I need to update the ESXi hosts to 7.0.3g. There is no custom OEM image for 7.0.3g.How sho...
Currently I've several Hyperflex cluster in production environment and below are the versions:HXDP: 4.5(1a), 4.5(2a)FI: 4.1(3c)Server: 4.1(3c)Now I would like to upgrade the FI firmware and also add in 1 new Hyperflex cluster with 3 converged nodes. ...
Hi everyone,i have a couple of UCS C220 M4 with a mLOM Cisco 1227 10G sfp+.I have linked this card to an ASR9K, directly, without a switch.The link on port 0 is UP, no problem on L1 10G, but on the port of ASR9K, no MAC Address is viewing, is not pos...
First time I have noticed this error and don't understand it and cannot find anything on the InterwebChanged the firmware version on a Host Firmware Package to 4.1(3i). When I select the Hardware compatibility Report the results are "Cannot Determin...
Hi,As part of our UCS configuration script, we run the following to configure FI ports as uplinks (example):Add-UcsUplinkPort -AdminState 'enabled' -PortId $PortId -SlotId 1 -FiLanCloud 'A' Before executing this however, I want to check if the port i...
I am looking for a cisco monitoring solution for c-Series rack mount VMware ESXi servers that i have all over the globe.Does Cisco have an snmp monitoring solution like HP Systems Insight Manager(SIM)?I downloaded UCS Central but that only seems to a...
Resolved! UCS B200 M6 Recommended Firmware
We have 1 UCS 5108 Blade Server Chassis with 6324 FI. Recently we updated the Infra and UCS Manager to release 4.2(2a). There are 8 Blades: 2 B200-M5 and 6 B200-M6. The documentation mention that the minimum release for M6 is 4.2(1d) but in the Softw...
WE use service profile templates to deploy our b series. Historically every time we get a new blade "version" we create a new Service Profile Template for them. For example b200m4 blades has its own service profile templateWhen we got new m5s for a ...
Server: Cisco UCS B200 M3 F/W: B200M3.2.2.6f.0.052120182033Hello, we have a problem after updating bios we've got an error BIOS POST failed power-on self test, CODE F0313 object sys/chassis-3/blade-1how we can get more widely information about this ...
