Unified Computing System Discussions

Is it possible to activate mschap2 on the ucs system?I only found this:ucs-A# connect nxosucs-A(nxos)# show aaa authentication login mschapv2MSCHAP V2 is disabledBut i can't figure out how to enable it.

Can the 1000v be deployed in a non-Cisco networking environment? lets say we have HP blades and a Juniper ToR switch.With  the UCS system, the 1000v CLI is accessed via UCS Manager ( I think Im  right about that). The UCS manager resides on the 6100s...

If you have 4 5108 Chassis can you have 1 chassis with 4 links per fex and 3 with 2 links?  I would imagine the answer to that is no, as the policy is system wide.  Personally I really wanted the policy to be more like MLPP and be a minimum set of li...

Hello,Quick question regarding VSAN trunking. I have 2 6120 Fabric Interconnects and 2 MDS 9148's. Fabric-A is connected to MDS-1 and Fabric-B is connected to MDS-2 (4 4Gb links).I have created 3 VSAN's on the MDS's and have configured the ports conn...

Trying to PIN all traffic from NetApp filer to a specific port channel uplink and having no success.NetApp Filer is direct-connected to 6120 (appliance port mode).  There are 2 northbound port channel uplinks (Po1 & Po2) from 6120 to LAN.  I have cre...

I posted this on the VMWare Community forum, and they were no help... so I am posting here.Good Morning,I come from previous VMWare/ESX experience, and that  experience has always been with ESX hosts on stand-alone servers.   I am  getting ready to d...

plz help the cisco n1000v is used with ucs b series or the c series plz help am very absent for that thank you

what is the difference between end host and the switching mode and whom is more powered the ucs b or c series

Hi all,question about cabling....what is best practise for interconnecting IOM to interconnect?4 cables from IOM_A to Interconnect_A4 cables from IOM_B to Interconnect_BOR2 cables from IOM_A to Interconnect_A2 cables from IOM_A to Interconnect_B2 cab...

i need to know what courses and exams i should take to improve my sales ability in Cisco unified computing

The Cisco 1000v vDS virtual  switch, which acts as a plugin to the VMware vDS, allows stateless  computing by simplfying policy migration during a vMotion event. In the  1000v, a port profile that includes security and QoS policies is created. The po...