Voice Systems and Accessories - Small Business - Page 148

SPA525G2 call recording not working (registered in UC320w)

HiI have a SP525G2, undertion options > 7 > 5 (Call Record Configuration) both options have check marks.I have a USB drive inserted (FAT32), options > 10 > 5 > says USB connectedOutside calls are not recorded and niether are internal ones, how do i d...

LDAP search filter in SPA504G

Is there guide to syntax of the LDAP Search Item 3 and LDAP Item 3 Filter fields? I need to filter the results based on whether or not the account is disabled or if the telephoneNumber is blank.

SPA303 phone key pad bleading over mic

Ever since my phone (SPA303) upgraded to software version 7.5.5 I have had an issue with the key pad bleeding over the mic while on speaker.Example.When I am on speaker and dial into a conference line that requires a pin, when I dial in pin (example)...

Cisco SPA 112 S/N SNMP

Hello,How can i get serial number of SPA112? Can i get it using SNMP or some API?

TAPI and Windows 10

Hi, so does anyone have any idea on how to make a UC540 system work with TAPI in Windows 10? Or something different if its not called TAPI in Windows 10?

Calling ID number being forwarded to Cell Phone

I have an interesting problem which I'm sure can be done just not sure. I have a client which has an ATA. When she leaves her office she forwards the calls to her cell phone and at present the number showing up on her phone when the forwarding is i...

SPA8800 SIP to SIP call

Hi,I just want to know if it is possible to do sip to sip call through SPA8800 ? (with 2 sip clients)Or with sip client to analog phone vice versa without PSTN(Local).Thanks.

SPA Reboot Reason "System 4"

Hello all,I have a deployment of around 30 Cisco SPA504g's and 5 of them are constantly going offline. The reboot reason I get is "System 4", I have looked through all manuals and Googled extensively and cannot shed any light on this?I have factory r...

Resolved! How to use the 'next' softkey in XML Directory - SPA504G

I have the basic XML Directory stuff working (CiscoIPPhoneDirectory) on the SPA504G. However I realise I can only display 32 entries and I note that there is a "next" softkey enabled, however it seems to not do anything. How can I link this button pr...

SPA525G2 - can't transfer calls, just drops out

I am not sure if this is a SIP provider thing or a phone config. I have a SIP account registered on a SPA5252G2. On an inbound call I answer and can put the caller on hold by pressing the 'Transfer' softkey. I get a new dial tone and I enter the exte...

SPA525G2 7.5.7 F/W update - which file to use

Hi - there are two files that come down in the SPA525G2 F/W update for 7.5.7:spa525g-7-5-7.binspa525g-7-5-7-bt.binI can't find any info as to which one I should be using. I assume all the SPA525G2's have the bluetooth module (I can see BT details in ...

UC560 Daylight Saving Time

Hello,We have a UC560. Once Daylight Saving Time (DST) was initiated we updated the time in CCA to the correct time - one hour ahead.The problem: The messages being sent to our PC's when a caller leaves a voice message is 1 hour ahead of the actual t...

How to disconnect a call that is not hung up

We have attached an intercom system to a Cisco SPA112. The intercom system does not hang up the call. When the far end hangs up the call a disconnect tone is played for a long time. Is it possible to control how long that is played for? Is it possibl...