Voice Systems and Accessories - Small Business

Some frustrations I cannot seem to get answers for: 1) Change the auto-attendant pickup ring from 3 to 42) Changing the display names on the SPA504g handsets (a lot of articles on this if using SIP not SPCP however)3) Getting a Plantronics CS540 to w...

Are Cisco SPA-504G phones supported in any CME versions?

hi,My SPA525G2 uses the 7.5.6 firmwareWhen I receive an unknown apel the transfer button is not present.It is therefore impossible for me to transfer my apel.there is there a specific option has changed?

Hello Community,I've been experiencing issues with my UC320W and I've been working with my VoIP provider Callcentric to resolve the issues.  The problem occurs when a phone call is placed on hold, or the phone call is transferred to another phone in ...

Hi all. I have UC 540 in production and I recently added Lync Server 2013. I followed tutorials (was configuring through CLI) and as a result, CISCO phones (SCCP) can call Lync client and vice versa, but Lync clients cannot call outside the LAN. I am...

How do I prevent my users from calling international phone numbers? CUCM 10.0 + Cisco H.323 gateway Take into consideration that according to the NL numbering plan:0 - external00 - long distance000 - International So matching for 000 is preceded by a...

I have a BLF configured on SPA514G as "fnc=blf+sd+cp;sub=201@$proxy".The proxy forwards SUBSCRIBE to our presence server.The "200 OK" on SUBSCRIBE and the NOTIFY to SPA contains record-route. When the SPA re-SUBSCRIBE, it sends directly to the presen...

Hi, In my office we are going to deploy ip telephone system. So i am preferred UC560 but i have some doubt about this device.1.Max how many ip phones will work with this device?2. I am using CISCO-2960 switches is it possible?3.Please describe about ...

Hi We have recently installed a SPA232D and integrated with our CUCM 8.5 as a 3rd party SIP devices which works fine.However approx every 3 days the device unregisters from CUCM and only way to bring it back up is a reboot.When it is deregistered we ...

I have four sites of which the main site has a UC560. The site would like to connect phones at the other site through the tunnels we've setup through sonicwalls to the main site. Can anyone think of ways to do this? What settings would a phone need t...

Hi everyone!I've got SPA112 with the latest firmware 1.3.5 UX. The problem is: I cannot access it via HTTPS using latest browsers, e.g. Chrome 39 or FF 34. They show error that a fallback to the previous version of SSL is disabled.It seems that SSL3 ...

I recently configure call connector server and client solution , everything works except for one issue, when I try to chat with an external user I got the following error : "No external IM account setup. Unable to send IM" I'm trying to send it to a ...

Greetings,According to documentation on Software Pack 8.6 it is possible to register Cisco 8941 and 9971 IP Phones, both of them comes with built-in cameras... Is it possible to just register the phones in the UC500 and start using video or do I need...

Our organization has been using the UC540 for a few years now for our phone system and just a few weeks ago we decided to implement the TimeCardView for tracking of employee hours. However, it seems that only total hours are tracked, and there is not...

I can't create new or modify existing DHCP pool inside our UC560 by using CCA 3.2.3 version: Configurate->Routing->DHCP server.  I always get error "invalid DHCP pool range. The default gateway IP address 192.168.2.1 must be within the range of the a...