Voice Systems and Accessories - Small Business

HelloHow can I calculate the amount of calls that the BE3K can handle at the same time? The datasheet does not talk about maximum trunks supported by each BE3K.Thanks,Adolfo

I have a Cisco/Linksys SPA 962 Small Business IP Phone that I need help configuring.  The device was previously configured for a different workstation and I need to add the new SIP Credentials for my new VOIP provider.  Let me say that I am a busines...

Hi I have UC320 installed and am in an area that is both 5 number and 6 number digit plans.I have set the system to 6 digits, but then finding we cannot dial locally 5 didgits as I presume the system is waiting for the 6th.Is this correct or is my is...

I have just switched internet providers and they gave me different static IP's.  Once the change happened, I was no longer able to access the UC520 via web browser or CCA.  Previously, I used 10.1.10.1 to access Web UI.  I have connected via console ...

I'd like to manipulate teh prix of a phone number. Currently the numbers on hte CId come in as 01511234567.Now i'd like to remove the leading "0" and replace it with +49.on the SPA3102 I can add the +49 in the "PSTN CID number prefix" field but i cou...

Hi, when i have a call shift to an external line for SNR on an extension, the internal extension keeps ringing even after the external number that the call has been shufted to has picked up. Is there a way to stop this?                  

Hi everyone,I am trying to set up Cisco Jabber for iPhone with CME 8.6.Here is my config:voice register global mode cme source-address 10.1.1.1 port 5060 no outbound-proxy max-dn 56 max-pool 14 authenticate register hold-alert voicemail 555 tftp-path...

Hi,We ahd this setup and working for nearly a year now at one customers.3 weeks ago we update the UC560 to 8.6 and everything still worked.Now the VPN will not establish,I logged and SBCS STAC call and they worked through what they could but have tol...

Hi,I have been testing the UC320W dial plans in Ireland and have run into some problems. Most numbers work correctly, however I have tried to dial a number in the 052 area code and it has been blocked. The old numbers took the form 052XXXXX however a...

Hi, we-ve a UC320W with some SPA303 and 525G2 phones, but we have some questions about it.is there any way to access web configuration of the phones? the options to configure then in uc320 are few we´ve tried /admin and /admin/advanced etc...., there...

Good Morning, we are trying to set up a BE3000 to work with a Ubigate 1004 which is providing the BE3000 with PRI and allows us to utilise our SIP trunks. The Ubigate has been configured to work in this way and does function properly when connected t...

Hi all,Currently we have a UC320w with 6 SPA504G's with 5 lines in from a SIP trunk, im looking to add our standard analog line into the uc320w so we can divert calls from the analog number onto our new phones,So far iv tried enabling the port on the...

My client has an  SPA122 Software version  1.1.0(011)He needed to have STUN turned on and a STUN server IP entered.   I put the entries into a configuration file, which his device loaded and was able to get on the network  (so it must have loaded the...