Hello,My client has a UC540 system. We are trying to connect it to internet. We have got a static ip address, subnet mask, default gateway, primary and secondary DNS ip address from ISP. Can anyone help me configure UC540 so that we can configure our...
Hi:following UC320w instructions I updated firmware to V2.1.4(3). Te update went throughg just fine but when I tried to relog into the system it kept telling me that user and/or password was not correct.I reset system to factory defoults and went thr...
Is there an updated guide for the SPA525G that can explain how to use the new features such as the SSL VPN?For example, what is the correct format of entering the "VPN Server"? is it just an IP address? https://? what are the requirements? is a ce...
I am looking into getting the UC320. I already have an SPA8800 running off of asterisk and FXO lines. I only have two phones the SPA303 one here in the office and another phone at a home address. I want to get rid of my asterisk -freepbx- system and ...
I have 6 SPA-504G's on my lan. All running firmware 7.4.4. One of these phones reboots exactly every 24 hours. The DHCP lease for the network is set to 12 hours. All have identical provisioning xml files (save for the extension info). Attached i...
Does anyone know if it is possible to use this combination and how? Can't find anything re a 508G on the plantronic support site, and the 50x support guide does not really describe anything about this, just refers to plantronics website.Thanks.
I have a UC560 on the latest software package (downloaded & installed on Wed last week.).I want to use the monitor button on the SPA 508 to monitor analog FXS and FXO lines.However, I don't see these as options in the CCA monitor button drop down box...
What is the max number of analog extensions that could be configured on a UC560? We have a customer who wants with move from a Mitel system with almost 40 analog phones. They all go to small cabins hundreds of yards from the main building, so there...
Couple of quick questions and some background - we have four UC500's (One UC560 and three UC540's at branch offices) all connected via VPN and capable of extenson to extension dialing to each office - works great. However, remote branches with the 5...
Hi,I'll open a ticket with SBSC or TAC, but I'm taking chance here for my problem.I have a customer who is complaining about volume too low on his handset and speaker, notably when using the 6 FXO ports.No choppy sound, no delay, not a great echo iss...
Max number of simultaneous voicemail calls?I had a user complain that he pressed his SPA525G2 phone's envelope icon (voicemail x399) and got a busy signal.We were unable to repeat the error.Is there a limit to;1. The number fo people that can check v...
Hi,Is there any way to accept incoming T38 faxing on a SIP trunk and route it to an anologue port on the UC560?ThanksGraeme
Hi all thank in advance for any one he will post anything even if it is not the answer ,anyway i am having little odd behavior i do not know it bug with uc560 latest software pack that i am using or switch which is SF300-48p even with the latest f...
Hi all,I have recently setup a Smart CallConnector server. I'm interested in any feedback anyone can give on how useful they have found it. I haven't really found it to be brilliant so far and am wondering if anyone else manages to impress clients wi...
Hi All,We have been speaking with a partner of ours with regards to a call logging solution. There is a call scenario they cannot report on as the UC540 does not output enough information.What they have found is that if you make an outbound call then...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: