Voice Systems and Accessories - Small Business

Hi,I'm implementing a UC520 system for a customer, they have an existing infrastructure which are two numbers of 3560 switches and 1841 Router.They have about 4 different Vlans configured and the workstation vlan is 30 and the voice vlan is 40.I have...

Hi Guys,Why o why o why... Everytime I perform the upgrade using cca 2.2.4 and the latest software packs I always get and issue when trying to upgrade the CUE:++: DEBUG:  : se-10-1-10-1#se-10-1-10-1#++: DEBUG:  : WARNING:: This command will install t...

Hi,Please i need help. I bought SPA 900 series for use in an office with a UC520 device, i just found out that the UC520 does not support the SPA 900 series phones, i dont know what to do.Does anyone have any suggestions? Can i use ATA to adapt them ...

Hi,we have some issues with the UC550 connecting itself to an accesspoint via CCA from a router. The connection works fine and calls can be made, it's just the connection for while administering the UC540.Setup (only relevant parts):--- wan --- route...

I have an asterisk trixbox ce system and some phone calls are not disconnecting which I beleive are also causing our phone calls to drop.Software Version:6.1.3(a)I have contacted trixbox support and they said the system sends the phone a BYE message,...

Trying to decipher a datahseet and hoped you might have some insight.  Call  Manager has listed that "Auto attendant-Bundled with Cisco CallManager via the  Extended Services CD." but I have not been able to confirm if that CD comes with  it or is se...

Hi,The company where I work is going to buy a large number of IP phones SPA525G and I want to know if it is possible to configure massively? If so, the configuration file is XML? My company does not use CCM.Thanks

Hello!Just had a question  regarding an external DHCP  server for a UC 540.  I have added the "IP  helper-address" command to  "Interface BVI 1".  Everything works ok, my  computers get a dhcp address  but as soon as I try pinging from CUE out  to th...

Dear Sir or Madam,We have an problem with BLF.The spa504g is not learning the Record-Route within our 200 OK (for the first Subscribe). It must set its route set (Route header) to match the list of URIs in the Record-Route header sent in the response...

I have an spa525g with the spa500s sidecar.  The sidecar buttons are working for direct dial and status, however when I try to do a blind transfer for a button the call fails.  If I do a blind transfer and enter the 3 digit extension it works fine.  ...