VPN

Hello,I got an 871w from ebay and im starting to wonder if the console port is defect - its a console/aux port (never seen before).I have tried two different cables - both works fine on a 3560.Tried all of these baud ratingsStandard baud rates suppor...

Scenario:I have a network with 5 ASA 5505. One site is home office (main) and the others are remote locations.Currently all sites have two ISP's, a primary, and a secondary used for fail over.All remote sites have a vpn configured to the main site's ...

I have struggled for some time with DMVPN tunnels hanging and not recovering. The tunnels are part of a DMVPN where some spokes ara behind NAT/PAT and som are not. The problems only occur for spokes behind NAT. At all times there are no problems init...

Hey everyone, been in here several times with the same problem.I run serveral ASAs on several internet providers that all fail on a L2L to a remote site. On the remote site we have tried Palo Alto, Fortigate, Cisco ASA5505. On the local siste i run a...

Good morning,I made a change to my home network configuration, where I added a Cisco 1600 router between my cable modem and PIX 501, to which my internal hosts are all connected.  (See my discussion post entitled "PIX 501 not talking to Next Hop rout...

I am trying to contigure a standard PPTP server inside client outside configuration.I have added ACL rules to allow PPTP and GRE, turned pptp inspection and added NAT rule for PPTP.There is only one issue: If the source in the NAT rule definition is ...

**Problem**I have a Main corp location with IPsec tunnels out to a few small office. The site to site tunnel between main location and remote site generally do not have issues. The issues is the IPsec connections between the each remote sites. The tu...

Topology:Hub:(hub lan: 10.0.1.0/24) > (lan int [ip nat inside], g0/0: 10.0.1.1) > (flex interface, loopback100: 172.31.100.1) > (flex virtual interface, Virtual-Template1: ip unnumbered loopback100) > (wan int [ip nat outside], dialer0 - g0/1) > ISPS...

Hey everyone,I've been on the forums looking for a solution to my issue in my lab....I'm getting the No peer struct to get peer description error in my debug.  I've done a search on these forums but the changes that I made did not work for meIt has t...

Hi All,We have a dual hub dual dmvpn cloud network running EIGRP or about 50 and 100 sites in the coming future.I have configured it in a way for 25 spokes to designate hub1 as primary and the other 25 spokes to designate hub2 as its primary link.To ...

Hey guys,I need some help.  I am trying to setup On Demand Anyconnect VPN on my IPad and Iphones.  My understanding is a bit cloudy and I am hoping you guys can help.  Are these the correct steps or am I missing something?I have an Ubuntu OpenSSL CA ...

With our old Linksys wireless router on Applications issue we can redirect port, for example:Remote Desktop access from external pc: 201.85.X.X:1234    (appoint to our public IP and port 1234 )Whit this we access in the Lan the private 10.1.X.X  WinV...

Team,Recently I connected to a VPN that upgraded my AnyConnect client to latest version. Now when I try to connect to one of my customer ASA via AnyConnect that used old version, I am getting following message. Is this a backward compatibility issue ...