VPN

I have a network configuration with two firewalls. ASA5510 is the first level of security and then Microsoft ISA is the next level of security before traffic enters the LAN. The problem I am faced with is that PPTP works inbound to the LAN but would ...

Hi,I have a cisco router 2800, and i want to stablish an vpn encrypted connection with an ASA 5520 (property of a client of my own company)but i can't do it. I have checked the configurations and the debugs, but I do not see where the mistake can be....

Hi,I have a 1841 router with Ifirewall IOS behind a public IP.On the remote side I have a 1801 which is behind a modem/router.... therefore it has a private adress on its outside interface.Central Router (Pub IP)---- Internet ---- (Pub IP)Modem/route...

I'm new to the ASA and I'm trying to figure out the specific functional differences between the thin client WebVPN approach and the full SSL VPN client approach. I've scoured every piece of Cisco documentation I can find and I haven't found the answe...

I've c7200p-advsecurityk9-mz.124-15.T1.bin.I've the same configuration IPSec statefull from IOS Security Configuration Guide Release 12.4If I unpluged RJ45 from WAN or LAN interface on the Active router Standby router was restarting:*Jan 15 05:02:42....

The IOS upgrade on our 1841 routers from imagec1841-advsecurityk9-mz.124-9.T3.bin to c1841-advsecurityk9-mz.124-15.T5.bin appears tocause problems with the WIC-1AM-V2. After the upgrade I get a line of garbage whenattaching to the modem. Is this a k...

When people log into my network via VPN client, they find it difficult to access anything on my LAN. They can't even ping any active device.

I would like to know if its possible to create a site-to-site VPN tunnel with a Cisco 1841 router with IOS 12.4? If so could someone guide me to resources that would help me with the configuration? If it makes a difference the other end of the tunnel...

Hello,I have a Cisco router 877 configured as a Easy VPN Server. When I connect my laptop in the local lan I can access to the shared folder on the server. But when I connect my laptop from my house using a vpn connection I can't view any shared fold...

Hi,I have main office " A " where I have a PIX 525 with 3DES and DES enabled,and then I have two other branches " B " and " C ".at "B" I have a PIX 525 with 3DES and DES enabled,and at "C" I have PIX 525 with only DES enabled.Now I am trying to creat...

I have just the evaluation version the " Cisco Security Manager 3.1.1".I can not added more the device, i stop to 5 device, why ?

my vpn not comming up i have checked the plicies which is ok. my one end is cisco 611 and other is Netscreen.i am getting the following error:%CRYPTO-6-IKMP_MODE_FAILURE: Processing of Quick mode failed with peer at 203.x.x.244This indicate that ther...

trying to set up remote access vpn on a pix 5.1...its not passing phase I from the log...i cant find any sample configs because of the old ios...can anybody assist?here are my configsaccess-list 101 permit ip 10.100.55.0 255.255.255.0 host 192.168.1....

hello...does anybody have Cisco Secure VPN Client Version 1.1?...i need it to test against my old pix 5.1 os....thanks in advance