VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Hi all, I'm having some problems connecting VPN Client over the internet to our Cisco IOS router. Some help would be very much appreciated!!On the VPN client log I receive the following error messages:---------------------------...573 16:32:13.164...

j.dolphin by Level 1
  • 2453 Views
  • 13 replies
  • 0 Helpful votes

Hi all,is this the right configuration to configure the PIX 525 firewall to establish 2 site-to-site VPN tunnels.. sysopt connection permit-ipseccrypto ipsec transform-set 1ST_TRANSFORM_SET_NAME esp-des esp-md5-hmaccrypto ipsec transform-set 2ND_TRAN...

Folks, Right now we have both frontend and backend exchange 2003 servers sitting on the inside of our network. We have created a DMZ and would like to move the frontend Exchange to the DMZ.Would someone know what ports should i open from the DM...

Trying to use a bbsm as a bridge to the internet, on its own vlan not routed. BBSM is not able to get out to the internet.

Hello. The documentation that I've read on HA IPSec utilizing HSRP shows a headend site utilizing two routers running HSRP and the branch office running one router.I was wondering if you can run IPSec in HA mode utilzing HSRP at both the headend and...

Can someone help me on the output below:-Dec 22 11:44:54 UTC: %CALLTRKR-6-MODEM_NEG_CALL_REC: ct_hndl=19, v8bis cap=0x0000000000000000000000000000000000000000000000000000000000000000, v8bis mod-sl=0x000000000000000000000000000000000000000000000000000...

Hi,We have a 2811 router acting as an Easy VPN Server (12.4(4)T) and 831 routers acting as Easy VPN Clients (In auto, network-extension mode) running version 12.3(11)T7. All the routers have "isakmp invalid-spi-recovery" enabled.However quite frequen...

mnlatif by Level 3
  • 407 Views
  • 4 replies
  • 0 Helpful votes

Resolved! Vpdn access list

Hello ! I have setup a simple vpdn server on a Cisco 800 series router. It is used for remote users which are using W2k vpn client. Protocole is pptp. Users authenticate to the server using usernames defined locally on the router. Then they get local...

Hi there,I've a vpn concentrator 3005 with web vpn access and access with cisco client. With the cisco cliente the dns run perfectly but with web vpn the dns not working. I can visit web pages in internet but I've to put the ip address, if I don't do...

juan.saez by Level 1
  • 312 Views
  • 1 replies
  • 0 Helpful votes

I have a user that trying to connect to his vpn, but when vpn tries to connect it comes back with "Secure VPN connection terminated locally by the client. Reason 403: unable to contact the security gateway". He is the only one having these problems....

lkinchen by Level 1
  • 599 Views
  • 4 replies
  • 0 Helpful votes

Hi,I’ve installed a Cisco 3725 RAS bundle (3725 PRI Dial Bundle: NM-30DM,NM-1CE1B, IP IOS), which works ok for incoming calls. I’ve installed Dialout-EZ in order for me to use virtual modems for outgoing calls.I can commumicate via the virtual com po...

when i use asdm access ssm for the first time.i receive message that ask me write license.i download form cisco web site.it remain me value time is feb 2006.what mean of this license.if there any restriction when i bought ssm?

wanglei by Level 1
  • 315 Views
  • 1 replies
  • 0 Helpful votes

Hi all,I test vpn connection with vpn3005 and pix501 but fail... pix displayed the following message:402106: Rec'd packet not an IPSEC packet. (ip) dest_addr= 183.1.119.9, src_addr=183.1.119.11, prot= udp183.1.119.9 is pix's ip and 183.1.119.11 is vp...

teru-lei by Level 1
  • 569 Views
  • 1 replies
  • 0 Helpful votes