VPN

We have the need for customers to connect anywhere in the world to our network, directly to our network. We currently have two seperate systems working two very different missions, but a similar operation. They both have to provide secure dial-up acc...

I have a remote user who recently upgraded from W2k pro to XP pro. Before the upgrade he was able to VPN into the corporate network with no issues. Since the upgrade he can establish a connection but passes no traffic. This is from his home networ...

Dear All,I can only configure the Virtual Cluster IP Address on public interface for load balancing cluster. So client from outside can access using the virtual ip address. How about the traffic from inside to outside? Can inside client also load-bal...

Hi all ,I have router with interface BRI connected to ISDN , and i want to allow to remote client to connet to my LAN by using laptop and modem connection.where i can find exemple of this config??Thanks

I've got a PIX 506e (sw ver. , PDM ver. 3.0(1)). I used to be able to access the PIX via the internet with a browser, but now it hangs on "Loading PIX Device Manager. Please wait ..." with the unending flipping of the hour glass. It asks, and accepts...

Can some one let me know the actual significance of logging standby statement in a PIX 535 6.3 cluster...when we have a syslog server...will we be seeing LOGS coming from both the active and standby at the same time or what will we be seeing from a s...

Hello,I have Cisco PIX firewall with 6.3.3 code. Inside my network I have unix server. My vendor has PCs in two sunbets which are going access my unix server.Objective is how I can establish host-to-subnets (site to site VPN) so their PCs in two sunb...

Hi all,This is a general question. For those of you that have VPN clients connect to your corporate networks, what kind of methodologies you have in place to protect your networks from infections? Just like to know how you deal with the threats crea...

When I'm using digital certificates with VPN 3000 how can I be sure that I'm connecting with the correct concentrator and not with a rogue one which happens to be provided with a valid certificate, issued by a legitimate CA? In other words how is ide...

We have VPN modules that were removed from 1712 routers. Can these modules be used in any other series router?

i have the following error when users connect to VPN Concentrator 3015 through IPSec, disconnection problem with the following log at the concentrator Session Type: IPSec/UDP Duration: 0:50:01 Bytes xmt: 41469440 Bytes rcv: 3243248 Reason: Max time e...

Hello EveryoneI'm using a Cisco 2821 router with advanced security feature set.I have one public IP address used on an external interface, internal hosts use PAT to access the internet.Is it possible to run a Easy VPN Server on this external interfac...

We have one client that can initially reach all resourses then within 5 minutes the client machine drops can't even ping the ip given to the clientAny suggestions on this?

I have a user that was successfully able to connect to my FTP Server behind my VPN Concentrator via a LAN to LAN Tunnel. He was using passive FTP and I had 1 rule setup for port 20 and 21. Now he is using an active FTP client and I cannot get it to...

Iam using a VPN Concentrator 3030 for allowing WebVPN ( SSL-VPN ) to secure servers on the private segment. Is it possible to use my VPN Concentrator as a Transparent proxy so that the identity of the Client is not modified by the proxy/Concentrator.