Ok, I have been having weird behaviour. i can connect and log in. Then it seems that I can download, but not upload. For example, I can see my email, and receive relativly large files, but I can't send even a short email. Also, I can't connect to...
I have an IPSec tunnel between a Catalyst 6500 VPNSM and a Cisco router. I'm using the default SA lifetime values (1 hour / 4068 MB).Every hour, the Cisco router asks the Catalyst for a new SA negotiation 30 seconds before the current SA expires. How...
HI ,I am succesfull in establishing the vpn tunnel between two pix 515 E .Now that the access list bwtween the two isaccess-list pix2pix permit ip 172.17.xxx.xxx 255.255.255.0 172.18.xxx.xxx 255.255.255.0and at the opposite end it is access-list pix2...
Hello Forum,I have a question regarding the x25 alias command. Is it possible to code the same alias to more than one interfaces? I mean, let's say I have 40 serial x.25 interfaces with each his own x.121 address. Is it possible to separate them into...
Im running a lab combined with production test where we have desktop device traffic travelling over a pix to pix ipsec tunnel, itself which is tunnelled over a pix to pix ipsec tunnel, transiting over a provided MPLS segment (the MPLS which i have no...
Hi all, i just wanted to confirm that is PIX OS vary on every platform or same for all platform for eg 506 , 515 etc?one more qn when u r upgrading pix it will ask activation key or it will take from the OS ?Thanx in advance .Rgds,Rajesh
Hello,I am setting up site-to-site ipsec over a Metro-Ethernet link. 90% of the applications seem to be working right but some particular applications fail. I have already configured "crypto ipsec df-bit clear" in both routers and I don't have erro...
Hello,We have a series of VPN tunnels off of our Cisco PIX 506E. Does anyone know how we can kill one tunnel, but leave the others remaining?PIX OS: 6.3.4Thanks,Dave
Hello,I have begun watching router interfaces for input errors in an attempt to respond proactively to WAN issues.During this process, I noticed something that seems strange. The spoofing BRI0/0 interface (we use ISDN dial for backup) is showing inpu...
I have the following issueone site with a PIX and the other with a ConcentratorVPN tunnel between themthey have onverlaping networks, and I need the PIX side to do NAT for traffice before it goes into the tunnel, can the PIX do this, like the concent...
How do I apply a filter to a LAN-to-LAN connection?Do rules need to exist for both inbound and outbound traffic? (If a rule allows host A to communicate with host B, then a similar rule is required to allow host B to communicate with host A?)If so, d...
