VPN

I am looking for an easy way to update or add additional tunnels on the VPN client. I have a mix of 3.x and 4.x clients in the field. We are in the process of changing our external internet addresses and as such our tunnel definitions need to change....

Hi,I've got a pair of 3845s running 12.3(14)T. When they reload, the following appears in the log:R3845-1#sh logg | i PARSER000022: *Apr 5 13:15:31.515 BST: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:access-list 199 permit icmp host 10...

I have established a vpn Pix to router and everything is working fine between the two sites except some dns communications.When a DNS server (behind the router vpn) is trying to communicate with a DNS server (behind the pix vpn) is not working (tran...

We just had a Pix515E-R-DMZ firewall installed. We used to use the Cisco VPN client version 4.0.3 and Remote Desktop to connect to some of our customers. Since installing the firewall we can connect the via the VPN but not the remote desktop portion....

HiI Got a very strange Problem.I am having cisco2507 router having nat enabled on it with overloading on one end.i got six ip address from the service provider with one used for serial interface and other for gateway.I got vpn based clients and the p...

We will soon go live with a vpn client to pix solution. In my test lab....I put the outside pix and the two perimeter routers (that lead to the pix)with a private ip address.I nat the outside private pix ip to be a public ip address.I use the ip nat...

I'm using a PIX 515E, PIX6.3.4, and I've tried Vpn clietns 4.0.3 something and the 4.6.01.0019, all with the same result. The client tunnel comes right up. I can admin the pix thru it. The inside network behind the pix shows up in the client's route ...

I have an exchange 2003 and outlook 2003 clients, after connecting to my 3005 concentrator that have the latest software I get timeouts on my outlook client. Everything else works normaly, I can connect to my server remotly and my outlook authenticat...

HelloI am having problems configuring the WEBVPN and radius authentication. After configuring global authentication I can connect with webvpn but I can not assign users to groups. I need to assign users to groups to restrict access. I also followed t...

Hi,We have a 2811 ISR. We want to terminate a few remote sites at the 2811 with a 9-port Ethernet switch. For this we will need to create VLAN interfaces for InterVLAN routing.Can MPLS VRF's be associated to VLAN interfaces? Thanks,RegardsKartik

I have a DSL line for one of my remote sites, provided by SBC and I want to have my Cisco 831 connected to the SpeedStream model 5100 DSL modem. Behind the C-831 I will have 4 PCs with IP addresses provided by my Central DHCP server (I will have ip h...

Can the tunnel interface addresses in DMVPN be given an unnumbered ip address?

Installed 4.7 on concentrator and testing SSL VPN Client for the WebVPN. Client downloads and then issues the error 'The SSL VPN configuration received from te gateway is invalid, contact your administrator.'The debug information doesn't seem to prov...

I just upgraded my client from 4.0.3 to 4.6. Although it shows as if it connecting I cannot exchange any information with the concentrator. I checked from the concentrator side and it shows as Bytes Tx/Rx 0 and 0. Other coworkers have 4.6 client a...