VPN

HalloI have a router going to a pix501 (vpn) and this pix is going to another FW (vpn).My goal is to bring protected info from behind the router to behind the second FW, using the pix as a "hub". ->Spoke -> Hub -> SpokeI read on the forum from Aamir ...

I am looking for a firewall/VPN solution for our small firm. We have 35 people in our main office and twelve in each of our satelite offices. Right now we are using Wingate as our proxy server and we currently have no VPN. We run Windows 2000 Serv...

Has anyone had problems installing the VPN 3000 V4 client on an NT4 box with SP6. My box now blue screens.Frank

My setup goes like thisLan-->PIX Firewall-->Router-->Internet CloudWe use Cisco VPN Client 3.6.3(B) to connect to remote Peer. For remote desktop sharing we use PC anywhere services.Now problem we face on firewall is If I specify conduit permit ip an...

I'm trying to establish a VPN tunnel in dynamic mode between a PIX515E rel 6.3(1) and a BeWAN 6004. I need dynamic mode because the BeWAN is connected to a provider that is delivering his IP address when coming on line via the ADSL line.The ISAKMP st...

Helloi can not get my vpnclient ping the lan...my vpn client is able to establish the vpn with pix ,an ip is assigned to the client from the lan range...when i try to ping the lan ,i see packets get to pix with debug icmp trace,i see the encrypt pac...

I have a 1720 running Easy vpn server for remote access clients using Unity Client. Those connections from remote sites to the 1720 work fine. The problem is when a user coming from behind the 1720 which also servers as a firewall/ NAT gateway uses a...

Can any body tell me the difference between the 2. I am trying to decide on which router model to purchase, 3625 or the 3645 VPN bundle and I cannot find the difference documented any where.

How do you setup "transparent tunneling" for a VPN connection from behind a PIX?

HI all,The virtual adapter only work with Windows 2000 and XP ???There are an VPN client with virtual adapter for Win98?Thanks all.

This might sound a little strange, but trust me...there are a whole slew of reasons why I have to attempt this. :-)Is there any way to create a VPN tunnel on a IOS router with only one interface? The other end would be a 3030 concentrator.Basically...

Is there a way to configure a vpn client which connects to my pix515, to see all the network in "my network places" ?

We have a vpn setup where vpn clients need to access MS-Exchange using MS-Outlook as if they are in LAN. We have configured the vpn zone using "nat 0". We wanted domain authentication, MS-Outlook access. We have three networks connected to the PIX 51...

I'm currently trying to setup a cisco 7500 for VPN PPTP access (testing purposes)7500 has two ethernet interfaces169.x.x.x172.x.x.xI'm trying to use a XP Pro client to VPN (PPTP) to the 7500169.x.x.x.Here's how my config.txt looks likefeedback and su...