Wireless

Hi all, I am receiving the below alert on Syslog. "   %IP-4-DUPADDR: Duplicate address 172.27.6.4 on Vlan22, sourced by bcd1.d366.9917  " 1. Vlan 22: It is a vlan configured for one SSID 2. 172.27.6.4 is the IP address configured for the VLAN 22. ...

Hi, we're deploying a HA solution with 7510, the last week we perform an upgrade to 8.2, then configure AVC with flexconnect and local switching but we could only set in the felxconnect groups but not in the wlan simultaneously. Is this possible?

Hello guys, I have Cisco Prime 3.0 and Ineed to known how to set the part number license to management the AP AIR-CAP2702I-Z-K9. There are 10 APs and I need to known what is the PN. Could you help me, please? tks...

I need to upgrade multiple Cisco 5508 Wireless LAN controllers with 100s of Access points connecting to each. There are 2x Controllers set up at each site in AP SSO mode, with a custom Mobility MAC configured. The current software version is 7.4.100....

Hi Team, I've already configured (ISE 2.0 & WLC 5520) all the stuff to be able to use ISE BYOD services (Apple IOS & Android Devices). Bu t unfortunattely doesn't have success while i'm trying to download the application (Cisco Network Setup Assistan...

Hello fellow engineers! Today I've tried to connect a HP 510 bridge to our Cisco Wireless LAN (WLC 5760). The HP 510 bridge (MAC 8851.fb77.a2fc) is used to connect a wired client (MAC 14da.e9c9.e374) to the Wireless LAN. The HP 510 keeps a table wit...

Hi to all,  We have some SSID, only one of this use the webauth. If i join the SSID with webauth, and i leave this without authentication, and after i join one of others SSID (without webatuh), all query DNS response with 1.1.1.1 (virtual IP). Anyon...

Hi, I've got a couple of 2702 APs setup as lightweight and managed by our 5760 controller. However with both of these they seem to lose their entire config after being unplugged from the power. I've seen a few bug reports about this happening on old...

Our WLAN Controller 5508 gets from a Freeradius an Access-Reject with an Attribute Reply-Message. Is it possible to forward this to the wireless client? On WLC 5508 with "debug aaa packet enable" I see the WLC receives the Reply-Message. On the clie...

Does anyone can confirm that virtual WLC (8.1.131.0 ) is supporting Hyperlocation or just the physical appliance do? According to the CMX 10.2 installation guide hint the vWLC is not supporting Hyperlocation. Thx

I have a CISCO AP 1 some PCs can't view SSID, mobile can connect help me fix this problem, pls tks

Hi, Who can tell me, what does means this logg messages on wlc 5760? Jun 22 16:53:23: %IOSXE-7-PLATFORM: STANDBY:1 process wcm: capwap_nova_platform.c:3834 Error: Received unhandled capwap update event 5 (wlc-triss-1)Jun 22 16:53:37: %IOSXE-7-PLATFO...

Hey Cisco Community  I recently ran with a project using Aruba wireless equipment and they have a very cool command that displays the amount of DualBand (able to connect to either 2.4Ghz or 5Ghz) clients that are on the network and which network the...