Wireless

Win 7 64 - Multiple installs v 3.1.06079 finds vpn site and allows authentication but end up failing to connect with response "The VPN client driver encountered an error.  Please restart your computer or device, then try again."  Each install provide...

Both 4402 has all of a sudden started to output this message: "Warning: Controller has detected its IP Address 10.75.86.16 being used by a machine with MAC Address 00:0b:85:46:1e:c7." The trouble is MAC address 00:0b:85:46:1e:c7 is the controllers OW...

Hi we currently have a 2 year old prime 1.4 virtual appliance (forced to 1.4 as 2.0 did not support AC)  - we now wish to build a new 3.0 server as a new virtual appliance and then migrate the data (maps, reports, history etc) to this device. Does an...

Hi, In my syslog server we are seeing some wireless errors. Can you please tell me how to trouble shoot these errors. Errors 1. WW_WIFI_CORE1_WISM-B: *ethoipSocketTask: ethoip.c:338 ethoipSocketTask: ethoipRecvPkt returned error 2. WW_WIFI_CORE1_WISM...

Hi allI have a question to ask.If a laptop with a static IP roams from one AP to another, and both AP are in different WLC , different AP group with different vlan interfaces, can it still roam? Are there any additional configuration needed on the WL...

Hi Sometimes the WLC cannot see AP. I know several reasons are required for the WLC to see AP. They are: 1, WLC management interface should be at the same subnet as AP or using DHCP option43 etc 2, AP can get ip address  Now the WLC cannot see the AP...

Hi Experts, We are having 2504 WLC with 1042APs(2 spatial streams , 300Mbps) .Our clients are getting connection speed of maximum 72Mbps only in 2.4GHZ as well as 5GHZ I have tried the below settings , but still the speed only 1.Radio policy all 2.WM...

Hi Folks, With the advent of 7.4 directly connected APs were supported on the two PoE ports on the 2504 controllers.  However, I haven't been able to get this configuration to work, nor have I been able to find sufficient documentation that supports ...

Hi Expertise,   Can anyone suggest how to config cisco WLC 5520  WPA2 Ent ?   Thanks Hain

Hi,We are using Cisco wireless controller Model AIR-CT5508-25-K9 in HA Mode. We have two more remote location on which we want to setup wifi from same controller. In remote location we have different VLAN Subnet. So please help us how we can use Wifi...

Hello Experts, We have a WLC 5508 running 7.4.121.0  and have to upgrade it to support the 3702 AP's. I checked the below compatibility Matrix and can see that 7.6.110.0 IOS can support the 3702 AP's. http://www.cisco.com/c/en/us/td/docs/wireless/com...

Hello friends, I have about 100 access layer switches - L2 switches. Every day our wireless software, prime infrastructure, goes through via SNMP and does normal checks.  I know this because every day at x time our log shows this:  %SYS-5-CONFIG_I: C...