Wireless

Ethernet Bridge

Hi all,I am trying to build a Ethernet bridge. The bridge does form ie RAP -> Mesh.If I connect wireless to Mesh I have communications.When I connect the Mesh to a switch (trucked on switch & RAP / Mesh) and connect my Ethernet to the switch I don't...

APs in Flexconnect mode, initial AP group

We have deployed many Cisco site specific WLAN controllers worldwide.We are now testing APs in Flexconnect mode at our branches with regional C8510 controllers running 7.6.110.0. One of the issues that we see is that if we deploy a new AP and get it ...

Sleeping Client with Passthrough? Why not?

I read that one must use the user/pass method of web auth to take advantage of the newer "sleeping client" functionality. Certainly the same need for this function applies to Passthrough (acceptable use page submission) authentication as well, since...

Resolved! Supposed signal distance for AIR-ANT2566P4W-R

Hello, is there somewhere a documment that describes something like supposed distance which the wireless signal can reach when using for example AIR-ANT2566P4W-R? I need to know if I can use this antenna together with 2600 AP to create a point to po...

Resolved! 5508 HA and DTLS

Hello,i have a 5508 HA cluster with different software.Primary AIR-CT5500-K9-7-6-110-0.aesSecondary AIR-CT5500-LDPE-K9-7-6-110-0.aes and a 6.x FUSis it possible to change the secondary to AIR-CT5500-K9-7-6-110-0.aes and FUS 1.9.0.0 ?Rega...

Resolved! Guest data switching from 8510 controller for multiple branch sites.

I have many sites all in Flexconnect, controller by 8510 controller, is it possible for GUEST to do central data switching.I know authentication can be done centrally.Thank you

It is possible mixing different type of antenna at the same AP?

I'm planning to extend our WLAN for outdoor environment. due to the limited budget, I considering use some 2600e AP (mesh IOS) to achieve this goal.As we know, MESH using 5G for backhaul and 2.4G for client access. So it is possible to using a direc...

Resolved! vWLC-Supported vMware Exi version

Hi All Hope all are doing well I have vMware EXi.3.5 i want install Cisco vWLC in exi.3.5 Just want know Cisco vWLC it support vMware EXI 3.5 version ?????? Please help me Regards Muhammed

Resolved! Cisco Aironet 2700 Series Access Point

Hi,Anyone tried the new 2702i/e access point?Is this an replacement for the 2602-series? with an upgrade to 802.11ac?Does anyone know if this AP is supported for the WLC release 7.6.100? //Jan-Erik

Resolved! 8510 wireless controllers configured as HA and providing extra redundancy

I have two 8510 wireless controllers connecting to each other via the redundancy port, one WLC is the active controller and the 2nd WLC is the standby controller. Each WLC connects to a pair of Nexus 9708 distribution/router using Port1 and Port2. I ...

WSSI module. Does the WSSI module support both wave 1 and wave 2 support for 802.11ac.

What version of software did the WSSI support 802.11ac wave1. When does 802.11ac wave2 be support on the WSSI? Do you just change the software in the AP for this support?

WLC web authentication : allow per user account login in a time

hi forumers'how to set WLC 5508 to allow single create web authentication user account to get conencted in a same time. i found that i can use the same username and password combo to be login in 2 machine in the same time.what need to do on the setti...

Resolved! How many clients support access points 1602, 2602, 3602?

Hi! How many clients support access point 1602, 2602, 3602. I have found for example that the 1602 supports 32 ClientLink clients and max 128 clients, APs 2602, 3602 supports 128 ClientLink clients and max 200 clients. But is it really? And can we sa...

HA controller question

Dear all,For WLC HA ,can the HA controller act as redundant controller for more than one Active controller?

Resolved! 1602e standalone AP two SSID's romaing

Hello All,I have a client that I'm setting up two 1602e standalone AP's. They will be broadcasting the same SSID and on the same VLAN. I was wondering what is going to be the best solution for roaming for the client? I'm relatively new to aironets, b...

Wireless

Forum Posts

Ethernet Bridge

APs in Flexconnect mode, initial AP group

Sleeping Client with Passthrough? Why not?

Resolved! Supposed signal distance for AIR-ANT2566P4W-R

Resolved! 5508 HA and DTLS

Resolved! Guest data switching from 8510 controller for multiple branch sites.

It is possible mixing different type of antenna at the same AP?

Resolved! vWLC-Supported vMware Exi version

Resolved! Cisco Aironet 2700 Series Access Point

Resolved! 8510 wireless controllers configured as HA and providing extra redundancy

WSSI module. Does the WSSI module support both wave 1 and wave 2 support for 802.11ac.

WLC web authentication : allow per user account login in a time

Resolved! How many clients support access points 1602, 2602, 3602?

HA controller question

Resolved! 1602e standalone AP two SSID's romaing

C9800 need to change channel backhaul 5GHz

WPA2-Enterprise with AES 256-bit

External captive portal with MFA

Multiple web portals on WLC (internal and external in parallel)

RCS Failures

C9124 AXI-B Outdoor AP not joining Aironet ME controller

Problem with connecting LWAP and Printers in 2 separate locations

Issue Connecting Outdoor Access Point to Controller

How to broadcast AP hostname in the beacon for Cisco EWC on a 9130

Remote installation of antennas AIR-2547VG-n (AP 1562) / with cables.