Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hi All, I am using Prime 1.3 with MSE for location awareness deployment, I have 300 APs but only 200 will be  taking part in the location awareness deployment, the rest are in different zones.Do I need CMX licenses only for 200 APs and apply these to...

g.peart by Level 1
  • 919 Views
  • 4 replies
  • 0 Helpful votes

Hi all,I'm a novice at this so I do apologize...Is it possible to have DHCP enabled on the Aironet 1142n that leases IP Addresses in a different subnet to what the Aironet has? I've basically got an Aironet 1142n with a static IP address (i.e. 10.0.0...

I have an open park with nothing to attenuate the signal and so I'm concerned about CCI on 2.4. I will have a standing crowd of 20,000 but only catering to 6000 concurrent users. No seats to hide antennas below, and so I'm thinkig about using poles t...

Does anyone know if LWAPP/CAPWAP access points send out BPDUs? I can't think of any reason why they would, but wanted to see if anyone has direct experience.

gamccall by Level 4
  • 2280 Views
  • 6 replies
  • 0 Helpful votes

Hi All,     What is the ways to make user authenticate to WLC 2504 and what is the best and simple way and what is the differences btw each method _i mean for example need radius server or something else to be exist_ ?     and any one can give me cas...

I have a Cisco Wireless LAN Controller 5508, which uses 7.3.112.0.  I have the VeriSign certificate but I received two intermediate files (primary and secondary), and my question is, which one do I use?I have referred to this document from Cisco alre...

msingh2007 by Level 1
  • 9081 Views
  • 24 replies
  • 0 Helpful votes

Hello All,I have setup a guest wireless SSID on my 2504 WLC. I am trying to determine the best possible way to administer the Guest Wireless usernames and passwords. Is this possible ?Does anyone know if its possible to run a script or command that c...

Alex Li by Level 1
  • 839 Views
  • 2 replies
  • 0 Helpful votes

Resolved! 3602i/e TxPower

I'm wondering why the "allowed power levels" are different from one 3602i to another 3602i:(WiSM-slot8-1) >grep include ap-wbh-181-5 "show advanced 802.11b Press yes to continue(y)yap-wbh-181-5                     *1         *7/7 ( 4 dBm) [22/19/16/1...

Hello All,Currently I am using WLC 2504 with Software version 7.0.220.0. I am having some issues with Windows 8 clients they can't connect and I read on couple of review that wlc needs upgrade software. I checked and latest versin is 7.4 could you pl...

I have this AP and it has a problem.  If I plug in only the power injector with nothing plugged into the network side of the injector, nothing happens.  If I plug an ethernet cable from at Linksys POE switch to the network side nothing happens.  If I...

- I recently (tried) upgrading a 5508-wlc  from release 7.4.100.0 to 7.4.110.0 ; which worked but some2600 series ap could not boot. The following output was observed :Ethernet speed is 1000 Mb - FULL DuplexLoading "flash:/ap3g2-k9w8-mx.152-2.JA1/ap...

marce1000 by Hall of Fame
  • 2555 Views
  • 9 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card