Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Resolved! 5 ghz for 3602 access point?
With Cisco 3602I , which is a b/g/n device, does much does the spectrum does the client get. Is it 2.4 ghz only or some other value?thanks in advance!
Hi guys, recently we have purchased Reflection - an AirPlay mirroring software. Basically install Reflection in the laptop and you can view the screen of the iPad or iPhone via wireless network. we have tested in home wireless net...
We added a new controller to the group which we want to be as a secondary for all WAPs. How can I set it up so that I don't have to go to each AP individually? Can this be done on the controller or from the WCS?
Hi AllI have AP3500e serises and I need to cover distance up to 300m in directional point. I was trying to find any materials about distance which are covered by different types of antennas but I can't . I think I will prefer to use external antena ,...
Hello all,has anybody faced a freezing problem when you click in Cisco Prime Infrastructure 1.2 down on alarm bar and then to Rogue AP alarms and then try to add an annotitation or change a rogue alarm to Friendly?I tried it on different PC, differen...
I have two Aironet 1242AG access points. Currently, one of those access points is in use with an SSID of ABCWIFI.I want to extend the wireless network to an area that can't be reached by copper or fiber. So, I've purchased another 1242AG. What I'm...
Resolved! wireless ip pool allocation
We have a WLC 5500 connected to a 2960 acting as core switch. there is a server attached to the switch , bearing all dhcp pools for lan and wireless users.Can the wlc or the switch be configured in such a way that the wireless users associating to th...
Hi I have installed an Cisco access point that is connected to a Cisco power invertor. The status light is contantly pink with on other green lights. I read somewhere that the AP needs 56 watt of power. Are the POE convertors able to aupply this? Reg...
Resolved! Cisco Flex 7500 and anchor
Hello, I couldn't find this on the Cisco Flex 7500 specs http://www.cisco.com/en/US/partner/prod/collateral/wireless/ps6302/ps8322/ps11635/data_sheet_c78-650053.htmlDo anybody know if I can set up an anchor mobility group between the Flex 7500 and th...
Hi,We need to add additional APs to working wireless mesh network (WLC 4402, 1520 series AP).WLC 4402 supports 1550 series access points with firmware upgrade to 7.0.235.0 :http://www.cisco.com/en/US/docs/wireless/technology/mesh/7.0MR1/design/guide/...
Resolved! Cisco Aironet 1600
Hi Guys,I have installed a cisco 5508 WLC and managed to get AP 2600 to talk to the WLC but I'm having trouble to get AP-1600 series to talk.I checked the logs on WLC and it says CAPWAP-3-DECODE_ERR: capwap_ac_sm.c:3844 Error decoding Join request fr...
I just bought this wireless router cause I thought my old one was busted. Turns out my old one works. Can I use my wrt54gh wireless router as an access point in conjunction with my wrt54g2 router to give access to the lower floor of my house?I unders...
Hi NetproI need to acheive the below 1)i need to setup a Cisco unified wireless network , i need to configure 802.1X Auth to my WiFi Users , we setup acs 5.3 as Radius connected to ADcan the 802.1X auth work without Certificate or its must , current...
is it possible to connect Cisco Ap-1242AG with non-cisco wireless router to work as repeater?if yes can plz anyone to direct me to any guide or documentation to do this?thanks in advance Andy
Hi experts,I have two dinasour APs that I need to fix. They are configured in bridge mode to bridge a few VLANs between two sites. Right now the management IP on BVI 3 interface doesn't work. Does it have to be on BVI1 for it to work? When I say "wor...
