Wireless

newbie on wirelessTwice a week the nurses from home care come in with their laptops for meetings. During that time I see about 70 - 80 devices in that area with about 20-25 on 1 AP, the AP that is in the conference room they are meeting in and about ...

I have 8 APs directly connected to a stack of 3850 switches operating as the WLC. I have 4 more APs connected to another 3850 stack on a different floor operating as a wireless mobility agent. I have a trunk link directly between the two 3850 stacks....

I have a stack of 3850 switches running as a WLC. I've gotten the WLC up and running and have several directly connected APs that have joined and are functional. I have a second stack on another floor that I've tried to setup as a mobility agent. The...

We have a branch office that we would like to setup a guest network at.  We would like to use flexconnect for local switching being that  the branch has a local internet service.  Our plan is to setup a non-routable VLAN that will on have internet ac...

Hi techies,We have implemented a new wireless mobility guest SSID in between the anchor and multiple foreign controllers.We are using a custom webauth page, written by the customer, which was working great.Since we've upgraded to 7.2.115.2, we receiv...

Hi,I would like to add a second Internet ASA5xx gateway to our guest anchor wlc in the DMZ, which is connected to a guest vlan switch, so that the guest anchor wlc can connect guest users to two separate Internet gateways (i.e. guest vlan1 and vlan2)...

I'm using a HWIC-3G-GSM with a CISCO1921 in a lab. My configuration works fine without a Dialer Interface. Connection is up, IP given etc. ... What are advantages and disadvantages of using a Dialer Interface with a cellular interface to get connecte...

        Hello i have two WLC (AIR-CT2504-K9) located at two different sites. there is a total of 51 AP's on one and 16 AP's onthe other and they failover between the two controllers. The problem is; every 2 weeks the WLC stops working and has to be r...

Hi all, Having a wireless link flapping issue happen on the network. Would like to find out the possible root cause on this case. (a) Problem statementI found these at logging.Symptom 1Sep  8 07:55:27: %MAC_MOVE-SW1_SP-4-NOTIF: Host 28cc.0102.xxxx in...

   We are having the said issue with all the branches after we have migrated the cucm 6.1 to 8.6, wireless phones register to VGW with SRST mode about 2 times a day, we have to manual kill it on the WLC in order to force them to register on the cucm8...

Good Afternoon,I was looking at a client detail on some of our Flex Connect AP's and in some instances I see a high number of Data Retries. Any indicitation as to what is causing this? Is it of any concern?                  

Hello,After installing an 8500 controller on 7.4.100.60 and migrating 1000 APs do this controller, we have the following problems:[1] clients get disconnected and loose sessions (note: client is mobile gun and is heavily mobile). I have the impressio...

Hello Cisco, Currently we have two remote offices using MAC filtering for wireles devices to join the wireless network.  Site A is using a Cisco 4402 WLC, and Site B is using a Cisco 4404 WLC.   What is the best way to enable/share MAC address filter...