Hi Meraki Team,¿It's possible to add Application for the Firewall and traffic shaping rules?, we are trying to add QoS rule in one of our SSIDs in order to clasify MS Teams Audio / video / Sharing / Media with QoS Classification EF / AF21 / AF41 but ...
Hi. I have a 9800 WLC that has been configured via CLI. However, when I access the device via web interface it starts off with the "zerodayconfig" as if it is right out of the box. There doesn't seem to be anywhere that I can bypass this and I'm won...
Hi, I'm planning to use an MR76 with an MA-ANT-25 patch antenna to cover a a warehouse. The customer has only 5 Ghz devices, is it ok to connect just one MA-ANT-25 for the 5 Ghz band, or is it mandatory to connect two antennas for both bands?Thanks
Need to know, does this model C9120AXE-K support autonomous mode? For branches that need to be standalone unit, with no need to connect to WLC or flex connect configuration.When I convert this C9120AXE-K to ECW, it stop all process and revert back to...
Hi, I plan to use MR46e AP for a new large warehouse installation (365,760 sq meters) . We have had success with these before. Problem is here that the ceiling is 40 feet, about 12 m. I can't find much info on antenna range. Although with small dipol...
Hi guysI’m struggling with a situation on my work that needed to be deployed. The current situation we are in at the moment, we have multiple branches that contains an AP’s connected to single WLC in one sites which is It is considered as SPOF. In ou...
Hi all,Hitting a wall with an issue we're seeing and we're not sure if this is our configuration problem or misunderstanding the features.We have a 9800-CL in public cloud on 17.9.5 code, we're aware you can only run in FlexConnect mode which is fine...
Hi, It became necessary to turn off SSO on my 5520 stack inorder to toggle NAT on/off, due to apparent bug in 8.10.196 code that presents the outside IP address as a reply target to all AP's requesting link. Since the 'inside' ap's can not reach the...
Hi everybody.I have a problem with my radius server.I have an SSID (on the site A), that use a VM with freeradius (on the site B).Both sites are linked eachother with a VPN connection.On my SSID configuration I put an public address 193.xxx.xxx.95 (w...
Hi Everyone. I have been experiencing an issue where Meraki Clients' captive portal stopped displaying. I have tried setting a new SSID splash but still not working on that network. Anyone here who have experienced such an setback and successfully re...
Dear allDuring few weeks I have tried to identify a mobility issue. I have a local environment with a good coverage and many type of devices, however, the honeywell handhelds corporate managed by SOTI platform, stuck during the roaming and the only w...
Hi guys, I have a little problem in the network. We have a WLC C9800-40 in production and also we have a Guest network, this Guest network going to internet via vrf (isolate from the network) for this Guest network we use a LOCAL DHCP on the distribu...
Listen here: S11|E14 Wi-Fi Evolution: Ushering in a New Wave of Wireless Advancements with Wi-Fi 7 Wi-Fi 7 has arrived, elevating 6 GHz Wi-Fi to unprecedented heights. In this podcast, we dive headfirst into the Wi-Fi 7 standard, examining its impact...
Listen here: S11|E10 Unwrapping AFC: A Discussion on 6GHZ WiFi and Standard Power The last time we spoke about wireless, the 9163e was just released. Since then, we’ve seen approval of AFC and cisco has been certified for standard power across its 6E...
I would like to know about MR outdoor APs wireless Meshing technology,configuration and best practices.
