Wireless

I have 802.1x/peap authentication in my wireless network with ACS 4.2 as the authentication server. I enabled PEAP machine authentication under the Unknown user policy --->database configuration sub-menu. I discovered that I was still able to access ...

Hello guys,     We have to install 46 APs (WAP2000) working on a G standard (just 3 channels no overlaping), they will be installed on a hotel, wich is/are the best practice(s) to avoid the minor interference between them due to just we have 3 channe...

Greetings all -  We are in the process of piloting eap-fast for mainly WinXP using CSSC, how we also lime to accommodate our Mac and Linux users.  We figured out the steps for Mac, however Linux seems a little an obscured topic with eap-fast.  Any wo...

Hi, we have 2 4402 controllers and WCS v.7.0.172. 1142 and 3502 AP'sProblem : 30-50 clients connects to one AP. Other AP's in the same room/area have only 3-6 clients connected. How can I prevent this and probably get better performance.I have disabl...

We see different 1142 APs disassociate from wisms from time to time. When it happens, we have to do shutdown and no shutdown on the switch port to bring the APs back. It just starts to happen after we upgraded wisms to code 7.0.116.0 and it only happ...

So, I want to install a 3500e. I have a hole in my wireless network where this AP will be a perfect fit. I do have a wireless controller running code 6.x, so I think I will need to upgrade to 7 which is not a big deal.The problem I have is the antenn...

Hi,I have an issue while trying to scale a floor image.I receive an empty error:Error(s): You must correct the following error(s) before proceeding:Error:and I am unable to rescale the image.It works for other floors in the same building. Any ideas w...

Hi all,I am attempting to change the global usernames and passwords for access points on a controller.  Everytime I try and change to the desired username and password, I receive the following error."Global TCP Adjust MSS:0:is invalid. Valid range is...

We’re deploying new WIFI towers at several of our vacation resorts and have decided to migrate from Wireless G to Wireless N access points.We currently have the following in each WIFI tower – Hotspot1 x 25mbps/5mbps circuit (inside air conditioned sh...

Will a Aironet 1260 support 802.11G client? If so is there any requirement for this to work.?

Hi,I am in need of assistance with one of our autonomous 1252APs. It loses network connectivity irregularly and ends up disconnecting everyone. It may stay up from a few days to a few weeks. I don't see any log messages that give any clues to why it ...