Wireless

Hi everyone,    I have a problem with an AP1310 which may need me to open a case for RMA. is there any way I can view the serial number using the GUI since the AP is already installed on a high mast but I didn't enable telnet on that?    Appreciate y...

Hi allI have doing EAP-Sim authentication with WLC 5508, client mobile is samsung galaxy 2, Radius proxy (Car).So, i get message from WLC (Debug) which show the message like mobile do not going authentication state. That will make the mobile do not a...

Hi,Is anyone else having issues with the new BB Playbook if using webauth on a Guest network. One of our people ios, so we switched him the the production network and that all works fine. The issue is when you try to setup the Wireless network as a h...

I have four Arlan 640's and may have had one or more fail. Is the Arlan 640 compatible with the Aironet 340 or 350, or is there a direct replacement for these units from Cisco?

The Cisco documentation states that ONLY Cisco access points are supported. Will 3rd part access points such as those by HP, Aruba and Aerohive not work sufficiently/correctly? Anyone using 3rd party APs with their 7921/7925 phones?Thank you,

I have a pair of Aironet 1310's I am needing to bridge. I have used the CLI to configure the BVI1 with the ip address and verified it. I then tried to access the GUI to configure the device via Internet Explorer and it would not provide access. I rea...

We are trying to allow LWAP to access INSIDE LAN via access switches then using Option43 point them to 5508 which are only connected to DMZ switch. The LAP cannot find WLC server still... not sure our design will work.I cannot find good documentation...

Hello,I have a Cisco 1142N Dual band AP that I have running in Autonomous mode at the moment, I have configured the AP (Through sheer guess work) to have an SSID on the 2.4Ghz N Radio and this is working fine with throughput at a healthy 100mbps+.I c...

I am setting up a WLC5508 for guest access and trying to create a customized Web Authentication Page to be loaded back on the WLC. However, the "Submit" button on the login page is not working when user clicked on it. Does someone has a working Webau...

Hi,i have one 2112 Controller connected deirectly to a firewall, there is no other network infrastructure avialable, so the APs are also dierctly connected to back pannel of Controller.can i have multiple WLANs in this scenario ? Will firewalls can s...

hi,is there a chance that Mesh APs will not associate with LWAPP imaged Controllers ? is it necessary that both AP and Controller shoud be mesh imaged ?can we convert them Mesh APs to normal LWAPP mode ? thanks,Anvar

Hello,I have a trouble with wireless interface load balancing.I operate about 1500 APs (1131AG/Standalone type) and my wireless clients are almost 12000 in a day.My troble is that most clients are attached to B/G band, even though some clients can be...