Wireless

Months back I was able to get my 350 pcmcia card to work with my powerbook G4 running OS X Panther 10.3 and now it will not work. I have done extensive troubleshooting and I am hoping someone can help me with this.When the card is inserted the "Power...

hello,I have following configuration:Catalyst 2950G-proximity switches with IOS 12.1(19)EA1c.Cisco Secure ACS Appliance 3.2.3.11SunONE Directory Server ldap server version 5.2_Patch_2I am trying to setup 802.1x authentication for wired and wireless (...

I'm working at an international company and my order was to install an wlan solution at our office in japan with around 25 employes. One AP1200 with two antennas.The problem is, that we need for transfer a file off 8,2Mb from server to client over AP...

Hello,I had installed 2 1310 in bridge config with 2 yagis, one is the root and the other the non-root, authenticated in LEAP with external free-radius server.My customer perform a bandwidth test, the result is :- 24Mb/s in the way root to non-root- ...

Hi,I have install the last version of IOS (12.3(2)JA2)on one of my AP 1231G and I have a problem to access to the AP via http and https.This is my aaa configuration:aaa new-model!! aaa group server radius rad_adm server xxx.xxx.xxx.xxx auth-port 1645...

Hi,The Q&A document about Cisco SWAN says : "Cisco Central Key Management to help ensure security of client roams" Does it mean that only CCKM is supported ?But what about WPA ? Is is supported for Fast Roaming and can I use it instead of CCKM ?Are o...

I have found the following information regarding WDS. The document indicates that WDS can be located on Cisco Catalyst switches, or Cisco routers. A. Cisco SWAN WDS is a collection of Cisco IOS Software features that enhance WLAN client mobility and ...

Hi,The Q&A document about Cisco SWAN says : "Cisco Central Key Management to help ensure security of client roams" Does it mean that only CCKM is supported ?But what about WPA ? Is is supported for Fast Roaming and can I use it instead of CCKM ?Are o...

I just boght two AIRONET 1200 and antenas. I would like to configure them to transfer information betwen them in Radio interface 54Mbps, and they also need to be conected in a wired lan. I've tried everithing, read all de manuals from cisco web site....

How may WDS APs can coexist in one vlan ?

The access point running 12.2(15)JA works in our environment. If I ugrade the access point to 12.2(15)XR2 then clients no longer reveive DHCP addresses. If I downgrade the AP to 12.2.(15)JA then clients receive DHCP addresses. The configuration file ...

Has anyone got ACS to pass on IP addresses to wireless clients when they authenticate? Is there a specific attribute to configure?

I am wanting to upgrade a few APs that are currently VxWorks. I have been able to do this on a couple using CAC but this takes forever. I have tried to get WLSE to see them. It can see all the APs that are running IOS but it will not see the VxWorks ...